User guide

35
HD View Finder HDF-700
調
AUDIO Signal Setting
1
By pressing MENU button on the front panel, access to
the MENU displayed on the screen.
Access to AUDIOin the MENU and set each setting item.
の MENU ー画面を表示
AUDIOに, 設定
AUDIO Function Setting
MENU
button
ENTER
knob-button
Press
Press
(4)Rotate
(3)Rotate
(2)Rotate
Press
[ENTER knob-button]: Confirm setting value
設定値(入力)確定
(1)Press
Press
[MENU button]: Access to MENU
ーへ
2
Access to the MENU / AUDIO / LEFT CHANNEL/RIGHT CHANNEL and select the output signal
to the AUDIO OUT 1/2 connectors from the embedded audio signals(1 to 8 channel) in the HD-SDI
signal.
AUDIO OUT 1 connector outputs the LEFT CHANNEL signal and AUDIO OUT 2 connector outputs the RIGHT
CHANNEL signal.
AUDIO OUT 1/2 ィオニュ AUDIO から LEFT/RIGHT CHANNEL にアして
AUDIO OUT 1 LEFT CHANNEL AUDIO OUT 2 RIGHT CHANNEL 音声されす。
AUDIO OUT 1/2 connectors output signals selection
Default factory settings : AUDIO OUT 1(LEFT CHANNEL) = 1 CH
AUDIO OUT 2(RIGHT CHANNEL) = 2 CH
AUDIO LEVEL METER (UTILITY function) can indicate the audio level of the embedded
audio signals of 16 channels when the WAVEFORM, VECTORSCOPE and AUDIO 16CH
function is selected by the UTIL(utility) button.
ー測定器機能のーデータは、UTILボ+ ベコープ+
ーデ16CH の画面ーデ16CH が表示れ、ベル
ON
ON
8
ALL
DUAL
OVERLAP
OFF
4S
8S
20S
60S
120S
300S
15
-20dB
-6dB
CHANNEL 1
CHANNEL 2
AUDIO OUT 1 connector
AUDIO OUT 2 connector
INFO [1080i/60]
PICTURE
MARKER [ON]
AUDIO [ON]
WAVE FORM [ON]
VECTORSCOP [OFF]
ZEBRA [ON]
SDI STATUS [OFF]
SETUP
Press
Rotate
Press
Rotate
[ENTER knob-button]: Select
ON or OFF
ON or OFF
1 to 8
or ACTIVE
or QUAD
or OVERLAY
ON or OFF
CHANNEL 1to8
CHANNEL 1to8
-60dB to -0dB
Adjustments and Settings
RETURN
LEVEL METER [ON]
METER BACKGROUND [ON]
DISPLAY CHANNELS [8]
ACTIVE CH ONLY [ALL]
METER COLUMNS [DUAL]
DISP TYPE [OVERLAP]
AUDIO PEAK LOG [OFF]
LOG SPEED [4S]
VOLUME [15]
HEADROOM START [-20dB]
HEADROOM END [-6dB]
LEFT CHANNEL [1CH]
RIGHT CHANNEL [2CH]
0 to 40