Instruction User Manual

42
MENUボタンを押て順次スクリンに表示されメニューにしがって、設定るメニューを択し、- / + ボタンで々設定値
を選します。
3
By pressing the the MENU button select the menu and by pressing - / + buttons, select each setting
value according to the menu and the value displayed on the screen in sequence.
Menu / Entry Setting
Brightness ( 0 - 50(reset) -100 ) るさ
Contrast ( 0 - 50(reset) -100 ) コントラ
Peaking ( 0 - 50(reset) -100 ) ピーキン
Sharpness ( 0 - 50(reset) -100 ) ープネス
Saturation ( 0 - 50(reset) -100 )
Hue ( 0 - 50(reset) -100 ) 合い
Reset ( Pressing resets all settings to50 ) ット
MENU button - / + (entry) button ニュ
Front Panel
COLOR INPUTRGBMARKER
MONO
16:9
4:3
PEAKING
MENU/-/+
button
TALLY
display
select switch
TALLY Setting
4
Input the tally signal to the TALLY IN connector or MONI IF connector.
And set the FRONT TALLY/REAR TALLY display select switch to the either position.
タリ信号TALLY IN ネクタまたは MONI INネクタに力します
FRONT TALLY/REAR TALLY 々の切替スイチで OFF(消灯)/L(low=減光)/H(high)選択してリーを表示さます
H : The tally indicator lights up brightly.
L : The tally indicator is dimmed to the lower brightness.
OFF : The tally indicator is turned off.
FRONT TALLY indicator
Now the setting and adjustment are done, ensure that the Camera pictures and RET signals are
displayed properly and tally indicators light up. If its OK, the operation is ready to start.
以上セッティング終了です。カラの映像、リーン映像が正く表示され、リーが点灯すことを確認しください
異状なければ準備了です。
RED
GREEN
REAR TALLY indicator
RED
GREEN
(Rear Panel)
Settings for LVM-89W
Multi-core Studio System NIPROS/S26