ES300/600 Operating Instructions Before operating the system, please read this manual thoroughly and remain it for future reference. Volume1, 1st edition Ver.1.
WARNING For the customers in the U.S.A. To reduce the risk of fire or electric shock,do not expose this apparatus to rain or moisture. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Table of contents Multi-core Studio System NIPROS ES−300 & ES−600 Names and Functions of Parts 4 各部名称と働き DS-260 Main panel 4 Front panel 5 Rear panel 6 Connector panel 7 メインパネル フロントパネル リアパネル コネクタパネル DS-560 Front panel 9 Rear panel 11 LVM-89W / Universal Head 14 フロントパネル リアパネル System Connection 20 接続 Adjustments and Settings 38 調節・設定 System Connection Guide 43 システム構成例 Supplied Accessories 46 Outside View and Dimensions / Specifications 48 付属品 外形寸法図・仕様 DS-260 48 DS-560
Names and Functions of Parts Camera Adapter ES−300 Main panel メインパネル INTERCOM SIDE TONE CAMERA ADAPTOR ES-300 POWER switch and indicator Turns the power on and off. The indicator lights up when the power switch is on. 電源をON/OFFするスイッチです。電源スイッチがONになっている時に点灯します。 TALLY indicator Lights up when receiving the tally signal from the Base Station DS-600.
Camera Adapter ES−300 Front panel フロントパネル CAMERA ADAPTOR TALLY OUT DC 12VOUT DS-260 RET OUT (MAX3.0A) DC12V OUT connector (XLR 4-pin, Female) Outputs the DC12V power supplied from the Base Station DS-560 for a camera, a camera light, a monitor, a prompter, etc. The maximum electric power is 30W. ベースステーションDS-560から供給されるDC12V電源を出力(キャノン4Pメス)します。カメラ、カムライト、LCDモニター プロンプター等の電源に使用します。 MONITOR OUT connector Connect to the Monitor LVW-89W with the supplied 6-pin cable(VC-450).
Camera Adaptor DS-260 DS-260 各部名称と働き Rear panel リアパネル AUDIO IN TC OUT MADE IN JAPAN Audio IN connector(φ 3.5 stereo mini jack) Input the audio signal from a camcorder. カムコーダーからオーディオ信号を入力します。 TC OUT connector (BNC) Outputs the time code signal from the Base Station DS-560. Connect to a camcorder with a BNC cable. DS-560 からの TC( タイムコード ) 信号を出力します。 TALLY indicator and ON/OFF switch Lights up when receiving the tally signal from the Base Station DS-560.
Camera Adapter ES−300 Connector panel コネクタパネル AUX REMOTE DC OUT (VIDEO OUT/TC IN) VIDEO IN INTERCOM HEADSET EXT.AUDIO OUT Pr IN Pb IN Y IN CAMERA connector (26-pin, male) Connect to the Base Station ES-600 with a 26-pin multi-cable (Sony CCZ-A25/50/100).
Camera Adaptoer ES−300 Connector panel コネクタパネル REMOTE connector (8-pin, female) Outputs the 8-pin remote control signal to a camcorder. Connect with the supplied 8-pin remote cable (RCC-450). 8 ピンリモートコントロール信号をカムコーダーへ出力します。 RCC-450 （付属） で接続します。 LANC connector ( φ 2.5 mini-jack ) Outputs the LANC remote control signal to a camcorder. Connect with the supplied LANC control cable. LANCリモコンに対応するリモコン用φ2.5ジャックです。付属のランクコントロールケーブルでカムコーダーへ接続します。 DC OUT connector (4-pin) Outputs the DC 8.
Names and Functions of Parts Base Station ES-600 Front panel フロントパネル ES-600 CABLE 100 EXT LINE (4W I/O) INTERCOM HEADSET 75 50 25 POWER switch and indicator Turns the power on and off. The indicator lights up when the power switch is on. 電源をON/OFFするスイッチです。電源スイッチがONになっている時に点灯します。 TALLY indicator Lights up when receiving the tally signal connected to the TALLY EXT LINE (4W I/O) IN connector on the rear panel.
Base Station ES-600 Front panel フロントパネル INTERCOM HEADSET connector (XLR 4-pin) Connect the supplied intercom headset(DL-400). インカム ヘッドセット(DL-400)を接続します。 In case using the headset with the XLR-4P Male connector, prepare the cable with the XLR 4-pin Female connectors. キャノン4Pオスコネクタのヘッドセットを使用される場合は、 キャノン4Pメス-メスのケーブルをご用意下さい。 1 MIC(G) 2 MIC(H) 1 2 3 4 1 2 3 4 3 H.PHONE(G) 4 H.PHONE(H) INTERCOM HEADSET H.
Base Station ES-600 Rear panel リアパネル HD/SD COMPONENT OUT Y Pb SDI IN OUT 1 CAMERA VIDEO OUT AUX Pr OUT 2 SDI RET IN OUT 1 AUDIO OUT RET IN VIDEO IN LANC TC OUT OUT 2 EXT. AUDIO IN EXT LINE (2W I/O) EXT LINE (2W I/O) TC IN TALLY EXT LINE (4W I/O) IN OUT AC IN HD/SD COMPONENT OUT Y/Pb/Pr connectors (BNC) Outputs the HD and SD analog component signal, Y, Pb and Pr from the Camera Adaptor ES-300.
Base Station ES-600 Rear panel リアパネル AUX connector (BNC) and VIDEO IN/TC OUT select switch Input the composite video signal from an external vtdeo equipment or outputs the time cord signal from the Camera Adaptor ES300. Select the VIDEO IN or the TC OUT with the select switch. ビデオコンポジット信号の入力またはDS-260からのタイムコード信号の出力を切替スイッチで切り替えて使用します。 RET IN connector (BNC) Input the composite video return signal from a switcher. ビデオコンポジット リターン信号を入力します。 TC IN connector (BNC) Input a time cord signal.
Base Station ES-600 Rear panel リアパネル EXT LINE (2W I/O) connectors (XLR 3-pin, female and male) Connect to an external 2-wire intercom line. 2Wインターカムラインに接続します。 Pin assignment XLR 3-pin,female 2PIN : HOT XLR 3-pin,male 2PIN : HOT 1PIN : GND 1PIN : GND 3PIN : COLD 3PIN : COLD TALLY EXT LINE (4W I/O) IN/OUT connectors (D-sub 15-pin, female) Used for the tally signal input/output and for the connection to an external 4-wire intercom line.
Names and Functions of Parts HDMI/HD Component Monitor LVM-89W/Universal Head LVM-89W Front Panel HD/Y HD/B-Y HD/R-Y CMP IN CMP OUT TALLY IN MONI IF PEAKING 16:9 MARKER RGB 4:3 COLOR INPUT DC 12V IN MONO Connector Panel (Right Side) Left Side Bottom Panel Screen 8.9 inch liquid crystal display (196(H) 115(V) mm ) 8.9インチ液晶（16：9） The panel might be cracked and have no image when a load is added.
HDMI/HD Component Monitor LVM-89W/Universal Head LVM-89W FRONT TALLY and REAR TALLY display select switch The brightness of the TALLY indicators on the front and rear panels can be selected by the select switches as follows. H : The tally indicator lights up brightly. L : The tally indicator is dimmed to the lower brightness. OFF : The tally indicator is turned off.
HDMI/HD Component Monitor LVM-89W/Universal Head LVM-89W Function buttons PEAKING 16:9 MARKER RGB 4:3 COLOR INPUT MONO INPUT select button : Select the input signal connected to the HD (Y/B-Y/R-Y) component, CMP IN (composite signal input), and HDMI connector. By pressing INPUT button, select the input mode in sequence. The selected mode is displayed on the screen.
HDMI/HD Component Monitor LVM-89W/Universal Head LVM-89W HD/Y, HD/B-Y, HD/R-Y connectors (BNC) Input HD component signals. The input signals are displayed when the input select mode is set to the COMP 1 mode. HD コンポーネント(HD/Y, HD/B-Y, HD/R-Y)信号を入力します。INPUT 切替ボタンをCOMP 1 に切り替えて表示します。 CMP IN connector (BNC) Input a composite video signal. The input signal is displayed when the input select mode is set to the CVBS 1 mode.
HDMI/HD Component Monitor LVM-89W/Universal Head LVM-89W DC 12V IN connector (XLR 4-pin) Connect an external DC 12V power. ( 10∼16V ) DC 12V 電源( 10∼16V, AC アダプタ等)を接続します。 HDMI connector Input a HDMI signal with HDMI cable. The input signal is displayed when the input select mode is set to the HDMI mode. HDMI ケーブルでHDMI信号を入力します。 これは、INPUTボタンで HDMI に切り替えて表示します。 1/4 inch screw hole Fix the supplied universal head.
HDMI/HD Component Monitor LVM-89W/Universal Head Universal Head Monitor lock screw(1/4 inch) モニター固定ネジ Used to fix the monitor. モニターを固定します。 Angle adjustment knob 角度調節ノブ Used to adjust the monitor position to any angle so that the display can be watch well. モニターの画面を見やすい角度に調節し、固定します。 Slide-shoe lock knob スライドシュー固定ノブ Used to fix the Slide Shoe to a camera accessory shoe. モニターのスライドシューをカメラのアクセサリーシューに固定します。 Slide-shoe スライドシュー Slide into a camera accessory shoe.
System Connection Multi-core Studio System NIPROS ES−300 & ES−600 Make sure to turn off the POWER switch of each unit before connecting. 接続する前に必ず各機器の電源スイッチを OFFにしてください。 Mount on the tripod 1 三脚への取り付け Fix the camera adaptor ES-3000 tightly to the bottom surface of a camcorder with the camera screw (s). カムコーダー の底面にカメラアダプターES-300 をカメラネジでしっかり取りつけます。 DS-260 INTERCOM SIDE TONE CAMERA ADAPTOR DS-260 In case of a camcorder which has one screw hole with the guide pin hole.
Multi−core Studio System NIPROS ES−300 & ES−600 Fix the monitor LVM-89W 1 LVM-89Wモニターの取り付け Fix the supplied universal head to the screw hole on the bottom surface of LVM-89W with the Monitor Lock Screw. LVM-89W底部の1/4インチ固定ネジ穴にユニバーサルヘッドをモニター固定ネジで固定します。 Bottom Panel Monitor Lock Screw Universal head 2 Slide the universal head with LVM-89W into the accessory shoe of the camcorder untill the slide-shoe stops in place. Tighten the Slide-Shoe Lock Knob to fix the universal head with the accessory shoe.
Multi−core Studio System NIPROS ES−300 & ES−600 LVM-89W connection LVM-89Wの接続方法 Monitoring the video signal 1 Connect an external DC 12V power supply with a XLR 4-pin cable. Or connect the MONI IF connector to the MONITOR OUT connector of the Camera Adaptor with the supplied 6-pin cable(VC-450). DC 12V IN コネクタへ DC 12V 電源をキャノン4ピンケーブルで接続します。 またはMONI IFコネクタへカメラアダプタから付属の6ピンケーブル(VC-450)を接続します。 2 Connect the input signal to the appropriate connector according to the video signal from a camcorder.
Multi−core Studio System NIPROS ES−300 & ES−600 26-pin multi-cable connection 1 26ピンカメラケーブルの接続 Connect both the CAMERA connectors of the Camera Adaptor and the Base Statioin with a 26-pin multi-cable. 26 ピンケーブルでカメラアダプタとベースステーションとを接続します。 (rear) AUX REMOTE DC OUT (VIDEO OUT/TC IN) VIDEO IN AUDIO IN TC OUT INTERCOM HEADSET EXT.
Multi−core Studio System NIPROS ES−300 & ES−600 N HD/SD component video signals connection 1 HD/SDコンポーネント信号の接続 Connect the HD/SD component video output signals from a camcorder to the Y IN/Pb IN/Pr IN connectors of ES-300 with BNC cables. カムコーダーからの HD/SD コンポーネント信号出力は、Y IN/ Pb IN/Pr IN コネクタへ BNC ケーブルで接続します。 from camcorder HD/SD component video signals ES-300 AUX DC OUT REMOTE (VIDEO OUT/TC IN) VIDEO IN INTERCOM HEADSET Pr IN EXT.
Multi−core Studio System NIPROS ES−300 & ES−600 Composite video signal connection 1 コンポジットビデオ信号の接続 Connect the composite video output signal from a camcorder to the VIDEO IN connector with a BNC cable. カムコーダーのコンポジットビデオ信号出力は、VIDEO IN コネクタへ BNCケーブルで接続します。 from camcorder Composite video signal ES-300 VIDEO IN AUX DC OUT REMOTE (VIDEO OUT/TC IN) VIDEO IN INTERCOM HEADSET EXT.AUDIO OUT Pr IN Pb IN Y IN (26-pin cable) Composite video signal to switcher, VTR, monitor, etc.
Multi−core Studio System NIPROS ES−300 & ES−600 Return composite video signal connection 1 リターンコンポジットビデオ信号の接続 Connect the RET OUT connector to a monitor, etc. with a BNC cable. リターンコンポジットビデオ信号の出力は、RET OUT コネクタからモニター等へ BNC ケーブルで接続します。 return composite video signal to monitor, etc. RET OUT (BNC) (front) CAMERA ADAPTOR TALLY OUT DC 12VOUT DS-260 RET OUT (MAX3.0A) ES-300 AUX REMOTE DC OUT (VIDEO OUT/TC IN) VIDEO IN INTERCOM HEADSET EXT.
Multi-core Studio System NIPROS/S26 NIPROS/S26 接続方法 リターンコンポジットビデオ信号/ LVM-89Wの接続 Return composite video signal connection with LVM-89W 1 Connect the RET OUT connector of the camera adaptor and the CMP IN (composite signal input) connector of the monitor LVM-89W with a BNC cable.
Multi−core Studio System NIPROS ES−300 & ES−6006 AUX composite video signal connection 1 AUXコンポジットビデオ信号の接続 Connect the AUX (VIDEO OUT/TC IN) connector to a prompter, etc. with a BNC cable. (NOTE : Set the VIDEO IN/TC OUT select switch of the base station ES-600 to VIDEO IN position.) ビデオコンポジット信号を出力する場合は、AUX (VIDEO OUT) コネクタへ BNC ケーブルで接続します。 ( 注 : ベースステーション DS-560 の VIDEO IN/TC OUT 切替スイッチを VIDEO IN にセットします。) to camcorder composite video signal GENLOCK signal to prompter, etc.
Multi−core Studio System NIPROS ES−300 & ES−600 Time code signal connection TC信号の接続 Time code signal to a camcorder : 1 Connect the TC OUT connector of ES-300 to a camcorder with a BNC cable. TC 信号を出力する場合は、DS-260 の TC OUT コネクタからカムコーダーへ BNC ケーブルで接続します。 2 Connect the time code output signal from a time code signal generator to the TC IN connector of ES-600 with a BNC cable.
Multi-core Studio System NIPROS/S26 NIPROS/S26 接続方法 HD/SD SDI video signal connection HD/SD SDIビデオ信号の接続 1 HD/SD SDI signal : Connect the HD/SD SDI output signal from a camcorder to the SDI IN connector of DS-560 with a BNC cable. And connect the SDI OUT1/2 connectors to a switcher, a monitor, a VTR, etc. with a BNC cable.
Multi−core Studio System NIPROS ES−300 & ES−600 AUDIO signal connection 1 オーディオ信号の接続 Connect the audio output signal from a camcorder to the AUDIO IN connector,φ3.5 stereo mini jack, with an audio cable. オーディオ 信号を入力する場合は、AUDIO IN コネクタ (φ3.5 ミニジャック ) へ接続します。 (rear) audio signal from camcorder AUDIO IN (φ3.
Multi−core Studio System NIPROS ES−300 & ES−6006 INTERCOM HEADSET connection 1 NIPROS/S26 インターカムヘッドセットの接続 DS-260 : Connect the supplied headset DL-400 to the INTERCOM HEADSET connector(XLR 4-pin, male) on the connector panel. 付属のヘッドセット DL-400 を INTERCOM HEADSET コネクタ ( キャノン 4 ピン , オス ) へ接続します。 ES-300 AUX DC OUT REMOTE (VIDEO OUT/TC IN) VIDEO IN INTERCOM HEADSET EXT.
Multi−core Studio System NIPROS ES−300 & ES−600 INTERCOM 2W line/4W line connection インターカムの接続 1 INTERCOM 2W line : Connect the EXT LINE (2W I/O) connectors (XLR 3-pin, female and male) to an external intercom 2W line with a XLR 3-pin cable. インターカム 2W ラインに接続する場合は、EXT LINE (2W I/O) コネクタにキャノン 3P ケーブルで接続します。 HD/SD COMPONENT OUT Y Pb SDI IN OUT 1 VIDEO OUT AUX Pr OUT 2 CAMERA SDI RET IN OUT 1 AUDIO OUT RET IN VIDEO IN LANC TC OUT OUT 2 EXT.
Multi−core Studio System NIPROS ES−300 & ES−600 TALLY signal connection 1 タリー信号の接続 Connect the TALLY OUT connector of the camera adaptor ES-300 to a monitor with a BNC cable. タリー信号を出力する場合は、TALLY OUT コネクタからモニターへ BNC ケーブルで接続します。 ES-300 CAMERA ADAPTOR TALLY OUT DC 12VOUT DS-260 TALLY OUT RET OUT to monitor (MAX3.0A) TALLY signal from switcher, etc.
Multi−core Studio System NIPROS ES−300 & ES−600 REMOTE controller connection リモコンの接続 In case of using a 8-pin remote controller (Sony RM-B750,B150, etc.) : 1 Connect a 8-pin remote controller (Sony RM-B150, B750, etc.) to the REMOTE connector of ES-600(rear panel) by the supplied cable with a remote controller.
Multi−core Studio System NIPROS ES−300 & ES−600 POWER supply connection 1 電源の接続 DC power supply to ES-300 : The DC power to ES300 is supplied from the base station ES-600 via the 26-pin multi-cable. Connect both the CAMERA connectors of ESS-300 and ES600 with the 26-pin multi cable, and connect the AC IN connector of the base station ES600.
Multi−core Studio System NIPROS ES−300 & ES−6006 POWER supply connection 2 電源の接続 DC power supply to a camcorder : Connect the DC OUT connector (4-pin) on the connector panel to a camcorder for the DC 12V and 8.4V power supply. DC OUT コネクタ（4 ピン）からカムコーダーへ接続します。DC 12V および DC8.4V を供給します。 DC 12V and DC 8.4V to camcorder ES-300 AUX REMOTE DC OUT (VIDEO OUT/TC IN) VIDEO IN INTERCOM HEADSET EXT.
Adjustments and Settings Multi−core Studio System NIPROS ES−300 & ES−600 Turn on the power switches of ES−300, ES−600, LVM-89W and Camcorder. Make sure the volume of each unit is set to the minimum position before starting adjustment. Never turn up the volumes suddenly to prevent hearing impairment.
Adjustments and Settings Multi−core Studio System NIPROS ES−300 & ES−600 Adjustments and settings for ES600 ES-600 CABLE 100 EXT LINE (4W I/O) INTERCOM HEADSET 75 50 25 SIDE TONE MIC 1 OUT SIDE TONE IN 3 1 CABLE select switch setting H.P 2 HEADSET ケーブル切替スイッチの設定 Set the CABLE select switch to the appropriate position according to the length of the 26-pin multi-cable connected to the CABLE connector.
Multi−core Studio System NIPROS ES−300 & ES−600 Adjustments and settigs for DS-560 3 INTERCOM EXT LINE (4W I/O) IN/OUT/SIDE TONE volume adjustment インターカム4W ライン入出力レベルの調整 Connect an external 4-wire intercom line to the TALLY EXT LINE (4W I/O) connector.
Adjustments and Settings Multi-core Studio System NIPROS/S26 Settings for LVM-89W 1 Input Signal Selection Select the input mode by pressing the INPUT select button on the front panel according to the input signal connected to the input connectors.
Multi-core Studio System NIPROS/S26 Settings for LVM-89W 3 Menu / Entry Setting By pressing the the MENU button select the menu and by pressing - / + buttons, select each setting value according to the menu and the value displayed on the screen in sequence.
System Connection Guide Multi-core Studio System NIPROS/S26 NIPROS/S26 システム構成例 LVM-89W HD Component recording system CMP IN BNC CABLE 1m MONI IF PEAKING 16:9 MARKER RGB 4:3 Supplied Accessories 付属品リスト UNIVERSAL HEAD 1 HEADSET DL-400 2 6-PIN CABLE VC-450 1 BNC-RCA PLUG 3 TALLY OUT LANC CONTROL CABLE MONITOR OUT or DC CABLE DC-EX3 1 REMOTE D-SUB 15PIN-D-SUB 15PIN CABLE 1 DC OUT (VIDEO OUT/TC IN) VIDEO IN INTERCOM HEADSET D-SUB 15PIN-CUT CABLE 1 EXT.
System Connection Guide Multi-core Studio System NIPROS/S26 NIPROS/S26 システム構成例 HD SDI recording system LVM-89W HD MONITOR(optional) CMP IN PEAKING 16:9 MARKER RGB 4:3 MONI IF COLOR INPUT MONO BNC CABLE 1m UNIVERSAL HEAD Supplied Accessories SDI OUT MONITOR LVM-89W 1 REMOTE 付属品リスト UNIVERSAL HEAD 1 HEADSET DL-400 2 BNC-RCA PLUG 3 BNC CABLE 1m 1 DC 12V OUT DC-Z7J GENLOCK IN HEADSET DL-400 6-PIN CABLE VC-450 1 CAMERA ADAPTOR TALLY OUT DC 12VOUT (MAX3.
Multi-Camera System Connection Guide Multi-core Studio System NIPROS/S26 NIPROS/S26 システム構成例 HD-SDI recording system Monitor LVM-89W HD-SDI Monitor CMP IN ●Camera 1 PEAKING 16:9 MARKER RGB 4:3 HEADSET DL-400 HEADSET DL-400 HEADSET (front) HD/SD COMPONENT OUT Y Pb SDI IN SDI IN(BNC) CAMERA ADAPTOR RET IN OUT 2 OUT 1 VIDEO OUT AUX OUT 2 RET IN VIDEO IN LANC Pr OUT 1 TC OUT OUT 2 SDI RET IN OUT 1 EXT.
Supplied Accessories Multi-core Studio System NIPROS/S26 NIPROS/S26 付属品 Description Model name Monitor LVM-89W Universal Head Quantity 1 1 Headset DL-400 2 6-pin Cable VC-450 1 BNC-RCA Plug 3 BNC Cable 1 m 1 DC Cable DC-EX3 1 DC Cable DC-Z7J 1 D-sub 15-pin - D-sub 15-pin Cable 1 D-sub 15-pin - Cut Cable 1 RCC-450 Remote Cable 1 LANC Control Cable 1 AC Cable 1 Operating Instructions(CDROM) 1 46
Outside View and Dimensions 179 Camera Adapter ES-300 246 CAMERA ADAPTOR INTERCOM TALLY OUT CAMERA ADAPTOR 59 SIDE TONE DS-260 RET OUT DC 12VOUT (MAX3.0A) (main panel) (front) AUX REMOTE DC OUT (VIDEO OUT/TC IN) VIDEO IN AUDIO IN TC OUT INTERCOM HEADSET EXT.
Specifications Camera Adapter ES−300 出力 Output Return RET OUT :1 BNC x1: 1Vp-p, 75Ω, Anaglog composite or HD-Y ※1 VIDEO OUT :1 BNC x1: 1Vp-p, 75Ω, Anaglog composite DC output DC 12VOUT :1 DC OUT :1 XLR 4-pin(female) x1: 16V (Maximum 3.0A) Mini 4-pin(female) x1: DC 8.
Outside View and Dimensions 320 Base Station ES−600 215 71 ES-600 CABLE EXT LINE (4W I/O) 100 HEADSET INTERCOM 75 50 25 HD/SD COMPONENT OUT Y Pb SDI IN OUT 1 CAMERA VIDEO OUT AUX Pr OUT 2 SDI RET IN OUT 1 AUDIO OUT RET IN VIDEO IN LANC TC OUT OUT 2 EXT.
Specifications Base Station ES−600 出力 Output HD/SD - SDI SDI OUT :1 BNC x2: 1Vp-p, 75Ω, Audio, T/C embedded SDI RET OUT :1 BNC x2: 1Vp-p, 75Ω, HD component HD/SD COMPONENT OUT :1 Video VIDEO OUT :1 BNC x1: 1Vp-p, 75Ω, Anaglog composite or HD-Y ※1 Audio AUDIO OUT :1 XLR 3-pin(male) x1 TC OUT :1 BNC x1 Time Code AUX* BNC x3: 1Vp-p, 75Ω, Y/Pb/Pr, auto detecting (HD/SD) 入力 Input HD/SD - SDI Video Video AUX* Time Code SDI IN :1 BNC x1: 1Vp-p, 75Ω, Audio, TC embedded SDI RET IN :1 BNC x
Outside View and Dimensions HDMI/HD Component Monitor LVM-89W/Universal Head 35mm 217mm HD/Y HD/B-Y 149mm HD/R-Y CMP IN CMP OUT TALLY IN MONI IF PEAKING 16:9 MARKER RGB COLOR INPUT DC 12V IN MONO 7mm 52mm 4:3 Outside dimension (unit: mm) 外形寸法図（単位：ミリ） 52
Specifications HDMI/HD Component Monitor LVM-89W/Universal Head LVM-89W Size 画面サイズ 8.9 inch-type 8.
ES-300 / ES-600 NIPROS/S26 Operating Instructions
