Datasheet

Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
Standard, Downsized, 105℃
KMGSeries
・
Endurance with ripple current : 1,000 to 2,000 hours at 105
℃
・
Solvent resistant type except 350 to 450V
dc
(see PRECAUTIONS AND GUIDELINES)
・
RoHS Compliant
◆
SPECIFICATIONS
Items Characteristics
Category
Temperature Range
-55 to +105
℃
(6.3 to 100V
dc
) -40 to +105
℃
(160 to 400V
dc
) -25 to +105
℃
(450V
dc
)
Rated Voltage Range
6.3 to 450V
dc
Capacitance Tolerance
±
20% (M) (at 20
℃
, 120Hz)
Leakage Current
6.3 to 100V
dc
160 to 450V
dc
I=0.03CV or 4µA, whichever is greater. After 1minute After 5minutes
CV
≦
1,000 I=0.1CV+40 max. I=0.03CV+15 max.
CV
＞
1,000 I=0.04CV+100 max. I=0.02CV+25 max.
(at 20
℃
after 1 minute) (at 20
℃
)
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
Dissipation Factor
(tan
δ
)
Rated voltage (V
dc
) 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 350 to 400V 450V
tan
δ
(Max.) 0.34 0.24 0.20 0.16 0.14 0.12 0.10 0.08 0.20 0.24 0.24
When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20
℃
, 120Hz)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Rated voltage (V
dc
) 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 350 to 400V 450V
Z(-25
℃
)/Z(+20
℃
) 5 4 3 2 2 2 2 2 3 6 6
Z(-40
℃
)/Z(+20
℃
) 12 10 8 5 4 3 3 3 4 6 - (at 120Hz)
Endurance
The following specifications shall be satisfied when the capacitors are restored to 20
℃
after subjected to DC voltage with the rated ripple
current is applied (the peak voltage shall not exceed the rated voltage) for 1,000 hours (2,000 hours to meet the following two conditions
1): 160V
dc
and larger, 2) :
φ
12.5 and larger) at 105
℃
.
Capacitance change
≦±
20% of the initial value
D.F. (tan
δ
)
≦
200% of the initial specified value
Leakage current
≦
The initial specified value
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to 20
℃
after exposing them for 1,000 hours at 105
℃
without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Rated voltage 6.3 to 100Vcd 160 to 450V
dc
Capacitance change
≦±
20% of the initial value
≦±
20% of the initial value
D.F. (tan
δ
)
≦
200% of the initial specified value
≦
200% of the initial specified value
Leakage current
≦
The initial specified value
≦
500% of the initial specified value
◆
DIMENSIONS [mm]
L' 15min. 4min.
φD'
φd
F±0.5
Vent
(except
φ5)
F±0.5
Sleeve (PET : Brown)
5
0.5
2.0
φD
φd
F
φD'
L'
6.3
0.5
2.5
8
0.6
3.5
12.5
0.6
5.0
16
0.8
7.5
18
0.8
7.5
10
0.6
5.0
φD+0.5max
L+1.5max
(φ5 toφ10) (φ12.5 toφ18)
Gas escape end seal
●
Terminal Code : E
◆
PART NUMBERING SYSTEM
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 1.0
µ
F:1R0,10
µ
F:100,100
µ
F:101)
Lead forming·
taping code
Terminal code
Voltage code (ex. 6.3V:6R3,35V:350,100V:101)
Series code
Category
E K M G A A A E A A A A A A A A NM
1 3 42 6 7 8 9 10 13125 18171611 1514
Please refer to "Product code guide (radial lead type)"
KMG
Downsized
KMQ P135
Time
CV
142
CAT. No. E1001O
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS