Security Datasheet

Page 2 of 6
Section 3 – Composition / Information on Ingredients
Components
CAS No.
Content （wt%）
Lithium cobalt dioxide (LiCoO2)
12190-79-3
less than 41wt%
Electrolyte ( - )
21324-40-3,
96-49-1
less than 16wt%
Graphite (C)
7782-42-5
less than 20wt%
Aluminum（Al）
7429-90-5
less than 22wt%
Copper, Nickel metal and
inert materials
7440-50-8
Remainder
Lead (Pb)*
7439-92-1
less than 0.004wt%(40ppm)
Mercury (Hg)*
7439-97-6
less than 0.0005wt%(5ppm)
Cadmium (Cd) *
7440-43-9
less than 0.0020wt%(20ppm)
* Banned or restricted material.
Section 4 – First-aid Measures
If contents leak, observe following instructions.
Inhalation: Fumes can cause respiratory irritation. Remove the exposed
person from the area immediately and provide fresh air. Seek
medical attention if necessary.
Skin contact: Immediately flush contaminated skin with plenty of water.
Contact physician if irritation continues.
Eye contact: Immediately flush eyes with plenty of water for at least
15 minutes. Seek medical attention.
Section 5 – Fire Fighting Measures
Extinguishing Media Extinguisher of alkaline metal fire is effective.
Plenty of cold water is also effective to cool the surrounding area
and control the spread of fire. But hydrogen gas may evolve by
through the reaction of water and lithium and it can form an
explosive mixture. Therefore, in the case that lots of lithium ion
cells are burning in a confined space use a smothering agent
(e.g. carbon dioxide or dry sand).
Fire-fighting procedure Use self-contained breathing apparatus and full protective gear
to be sure not to inhale harmful gas. Extinguish a fire from the
windward (upwind) direction as much as possible.