User Guide

1.
Fill container with desired
contents. Screw on the
blade assembly until you
have a tight seal.
1.
Use the dial to select an
Auto-iQ® program
or manual speed,
then press / to
begin blending.
2.
Flip container upside
down and install on base.
Rotate clockwise until it
clicks into place.
2.
When blending is
complete, remove the
container from base.
Then, remove the blade
assembly from container.
4.
Install lid, then install pitcher
on the motor base.
Use the dial to select BOWL
and press / . If more
blending is needed, run on
Speed 10 until combined.
5.
After blending is complete, remove lid and blade assembly. Serve in
separate bowls then add your favorite toppings, such as coconut flakes,
granola, fresh bananas, berries, and agave nectar.
Assembling the Nutrient Extraction* Cup
Blending
Taking It To Go?
Place the Spout Lid on top of the cup, and turn clockwise to seal.
SMOOTHIE BOWLS
FOR A CROWD
USING THE PITCHER
PRESS THE POWER
BUTTON TO TURN THE UNIT ON.
3. (Optional)
Amplify your base by adding
2 scoops of yogurt, flavor powder,
protein powder, and/or nut butter.
2.
Add frozen fruit, directly from freezer,
and/or açaí or dragon fruit packets
up to the 1300 ml line.
Cut larger fruit, like bananas, in quarters.
If using açaí or dragon fruit packets,
thaw slightly and cut in quarters.
NOTE: DO NOT microwave or freeze the Single-Serve Cup.
WARNING: Handle the blade assembly with care, as the blades are sharp.
*Extract a drink containing vitamins and nutrients from fruits and vegetables.
1.
With the Stacked Blade Assembly
installed in the pitcher, add milk,
or milk alternative such as soy,
coconut, almond, or oat milk
up to the 500 ml line.
ALWAYS DO THIS FIRST.
DID YOU KNOW?
Smoothie bowls are
thicker & spoonable,
compared to
smoothies which are
thinner & drinkable.