Use and Care Manual

1.
Fill container with desired
contents. Screw on the
blade assembly until you
have a tight seal.
3.
When blending is
complete, remove the
container from base.
Then, remove the blade
assembly from container.
WARNING: Handle the blade assembly with care, as the blades are sharp.
4.
Screw on the blade assembly and install
the bowl maker on the motor base.
Select BOWL and twist the built-in
tamper counterclockwise continuously
while processing.
Assembly
Blend & Enjoy
OR
OR
SMOOTHIE BOWL
BASICS
2.
Flip container upside
down and install on base.
Rotate clockwise until it
clicks into place.
1.
Select any program
to begin blending.
DID YOU KNOW?
Smoothie bowls are
thicker & spoonable,
compared to
smoothies which are
thinner & drinkable.
5.
After blending is complete, add your favorite toppings, such as
coconut flakes, granola, fresh bananas, berries, and agave nectar.
1.
Add milk or milk alternative such
as soy, coconut, almond, or oat
milk, up to the LIQUID FILL line.
2.
Add frozen fruits, directly from
freezer and/or açai or dragon fruit
packets up to the MAX FILL line.
Cut larger fruit, like bananas, in quarters.
If using açai or dragon fruit packets,
thaw slightly and cut in quarters.
ALWAYS DO THIS FIRST.
3. (Optional)
Amplify your base by adding
1 scoop of yogurt, flavor powder,
protein powder, and/or nut butter.
USING THE SMOOTHIE BOWL MAKER
FPOFPO
FPOFPO
FPOFPO
FPOFPO
FPOFPO
FPOFPO
IF USING
SINGLE-SERVE CUP,
SKIP STEP 2.
2.
If using the
bowl maker, twist
the built-in tamper
counterclockwise
continuously while
processing.
Taking It To Go?
Place the Storage Lid or Spout Lid on top of the
bowl maker or single-serve cup, and turn clockwise to seal.
NOTE: DO NOT microwave or freeze the single-serve cup or Smoothie Bowl Maker.