Warranty

1-877-646-5288

Using the Nutri Ninja

Cup

IMPORTANT: Make sure that the Power Pod is plugged

in for use.

1 Place the Power Pod on a clean, dry, level surface such

as a counter or table top.

2 Add ingredients to the Nutri Ninja

cup.

NOTE: Do not overﬁll! To avoid spilling, do not add

ingredients past the “Max Fill” line.

3 Place the Nutri Ninja

blade onto the cup and screw it

tightly until a good seal is achieved. (Fig. 1)

4 Turn the Nutri Ninja

cup upside down and place it onto

the Power Pod. Press down on the Nutri Ninja

cup to

pulse or blend. (Fig. 2, Fig. 3)

5 Once desired consistency is reached, remove pressure

from the Nutri Ninja

cup. Pull straight up to remove.

(Fig. 4)

6 Turn the cup upright and remove the Nutri Ninja

blade

by twisting the blade assembly counter clockwise.

7 Place the Nutri Ninja

Sip and Seal

™

lid onto the Nutri

Ninja

cup, twist to seal and enjoy!

8 Make sure that the Power Pod is unplugged when not

in use.

NOTE: To order additional Nutri Ninja

Cups, please

visit our website: www.ninjakitchen.com or feel free

to contact customer service: 1-877-646-5288.

Fig. 1 Fig. 2 Fig. 3 Fig. 4

For best results when blending drinks or smoothies, press down continuously until desired size

and consistency is achieved. For best results when food processing, use short “PULSES” by

pushing down on the cup in short, 1 second bursts, until desired consistency is achieved.