Use and Care Manual

www.ninjakitchen.com 13

Using the Nutri Ninja

2-in-1 Blender Pitcher (may not be included)

CAUTION: 6 Blade Assembly is removable and not

locked in place. If pouring with lid removed, always

remove the blade assembly ﬁrst. If using the pour

spout, make sure the lid is locked onto the pitcher/

blender by ﬁrmly pressing on the thumb tab.

CAUTION: Blades are sharp! Use extreme caution

when handling the blades and when placing the 6 Blade

Assembly inside the pitcher. Always hold the 6 Blade

Assembly by the shaft.

IMPORTANT: Never run the appliance empty.

1 Place the Nutri Ninja

2-in-1 Blender Pitcher on a

clean, dry, level surface.

Fig. 18

2 Holding the 6 blade assembly by the shaft, place it onto

the spindle pin inside the Blender Pitcher. (Fig. 18)

• UseONLY the 6 Blade Assembly in the 56 oz. pitcher.

3 Add the ingredients to be processed into the Blender

Pitcher.

IMPORTANT: Never add ingredients into the Blender

Pitcher before placing the blades in ﬁrst.

4 Place the Geared Lid onto the top of the Blender

Pitcher. (Fig. 19)

Fig. 19

WARNING: DO NOT try to assemble or operate the Power Pod,

Geared Lid and blades together outside of the containers.

CAUTION: 6 Blade Assembly is not locked in place. If using

the pour spout, make sure your thumb is ﬁrmly pressed

down on the thumb tab of the lid to secure the lid.

CAUTION: 6 Blade Assembly is not locked in place. If

pouring with the lid removed, ALWAYS remove the blade

assembly ﬁrst.