Use and Care Manual

www.ninjakitchen.com 11

USING THE MODULAR DOUGH BLADE ASSEMBLY

IMPORTANT: When making any type of dough, DO

NOT run the Power Pod continuously for more than

30 seconds. Do not add more than 2 cups of ﬂour

maximum when making dough.

IMPORTANT: Never run the appliance empty.

1 Place the Nutri Ninja

2-in-1 Processor Bowl on a

clean, dry, level surface.

2 Holding the single dough blade assembly by the shaft,

place it over the spindle pin inside the Processor

Bowl. (Fig. 9a) If the double dough blade assembly

is required when making cookie dough, insert the top

row of blades over the single dough blade assembly,

rotating it until it locks onto the single dough blade

assembly. (Fig. 9b)

The Modular Dough Blade Assembly comes apart and can be used in 2 different ways.

3 Place ingredients in the Processor Bowl.

NOTE: For best results add wet ingredients ﬁrst and

then add the dry ingredients.

4 Place the Geared Lid onto the top of the Processor Bowl

making sure the lid is securely in place. (Fig. 10)

5 Plug the power cord into an electrical outlet and place

the Nutri Ninja

2-in-1 Power Pod on top of the Geared

Lid. Pulse until all ingredients are well mixed.

(Fig. 11, Fig. 12)

6 Once processing is completed and the blades have

stopped spinning, remove the Nutri Ninja

2-in-1 Power

Pod and the Geared Lid. Carefully remove the Modular

Dough Blade Assembly and the dough.

Fig. 9a Fig. 9b Fig. 10 Fig. 11 Fig. 12

When the top row of blades is removed, this is

the single dough blade assembly and can be

used for making all other doughs (including pizza

and yeast doughs) and batters.

When the top row of blades is snapped

on, this is the double dough blade

assembly and is ONLY used for making

cookie dough.