Use and Care Manual

TOLL FREE: 1-877-646-528810
Using the Master Prep
®
Professional Bowl
Shaft
CAUTION: Blades are sharp! Use extreme caution
when handling the blades. Always hold them by the
shaft.
IMPORTANT: Never run the appliance empty.
WARNING: DO NOT crush ice in 16 oz. Chopper bowl
or damage may occur to the unit.
1 Place the Master Prep
®
Professional bowl on a clean,
dry, level surface.
2 Holding the lower blade by the shaft, place it over the
spindle pin inside the Master Prep
®
Professional bowl.
(fig. 1)
3 Carefully insert the upper blade over the lower blade
rotating it until it locks onto the lower blade. (fig. 2)
IMPORTANT: Always assemble the blades inside the
container.
WARNING: DO NOT try to place the blades onto
the power head and then into the Master Prep
®
Professional bowl.
4 Place the food that you want to process into the Master
Prep
®
Professional bowl.
IMPORTANT: Never add ingredients into the Master
Prep
®
Professional bowl before placing the blade
assembly in first.
NOTE: DO NOT add more than 2 cups dry or 1 cup
liquid ingredients as this will strain the motor and may
cause overflow.
21