Use and Care Manual

HIGH-HEAT ROASTER
10 High-Heat Roaster
11
Questions? ninjakitchen.com
• Turn the left-hand dial to
select MAX ROAST.
If you added pellets,
press the WOODFIRE
FLAVOR button.
• Use the right-hand dial to
set the temp, then press the
TIME button and use the
same dial to set the time.
• Press START/STOP to
begin preheating.
• While the oven is preheating,
start prepping your food.
(Estimated preheat time can be
around 25 minutes, depending
on the set temperature.)
STEP 1
SET UP
STEP 4
ADD FOOD & COOK
STEP 5
REMOVE FOOD & SERVE
STEP 2
ADD PELLETS
STEP 3
PROGRAM & PREHEAT
• Dip the pellet scoop into the
bag and fill it to the top.
NOTE:
The scoop is designed to measure
pellets needed for one smoke session.
• Pull the smoke box open,
pour pellets into the smoke
box until filled to the top.
Then, close the smoke box.
NOTE:
Pellets will not ignite if they are
not filled to the top of the smoke box.
DON'T WANT SMOKE?
Skip these steps.
• When unit is preheated,
“ADD FOOD” “PRS START”
will appear on the display.
• Pull the Accessory Frame
forward, place food on the Pro-
Heat Pan, and close the door.
• Press START/STOP. The timer
will start counting down.
NOTE: Halfway through the cook time,
the display will read “Flip.” Open the
door and flip your food. “Flip” will
disappear from the display after
30 seconds.
• When cook time is complete,
the unit will beep and “DONE”
will appear on the display.
• Remove food from unit with
high-heat cooking gloves
or oven mitts. Let food rest
for several minutes, then
cut, serve, and enjoy.
• See cooking charts for
inspiration, cook temps,
and times on page 12.
• Use oils with a high smoke
point—like canola, avocado,
vegetable, or grapeseed oil—
instead of olive oil.
• If using one of the above oils,
brush the oil directly onto the
food and do not pour/drizzle
onto Pro-Heat Pan to avoid
possible flare-ups.
FOR BEST RESULTS
Get a crispy, all-around char with temps up to 700°F.
Quickly sear and caramelize smaller foods.
MAX ROAST
BEST FOR: Portioned proteins like salmon
fillets and sliced veggies for sheet pan meals
• Install the Accessory Frame first,
then install the Pro-Heat Pan on
the frame.
IMPORTANT
Pro-Heat Pan should
be installed, as it needs to
preheat with the unit.