User Manual

For how-to videos and more, visit ninjakitchen.com Questions? 1-877-646-5288 76
PRECISION PROCESSOR
™
BOWL
Connect the base to power source. Press the Power symbol. After the unit is turned on,
display will flash “
” until the bowl is correctly connected to the base.
PRECISION
PROCESSOR
BOWL
CHOPPING
BLADE
ASS E M B LY
FEED CHUTE LID
WITH TWO-PART
PUSHER
REVERSIBLE
SLICING/SHREDDING
DISC AND SPINDLE
1 Place
Precision
Processor
Bowl on base
and turn
clockwise to
lock in place.
2 Holding
the blade
assembly
by the
top of the
shaft, insert
it into bowl.
1 Select any of
the illuminated
programs to
begin processing.
2 When processing
is complete,
remove bowl from
base by turning it
counterclockwise,
then lifting it o.
3 Remove lid by
pressing the
RELEASE button
on side of front
tab and lifting up.
4 Remove blade
assembly before
emptying bowl.
WARNING: Chopping Blade Assembly is sharp and not locked in place. Before pouring, carefully
remove blade assembly. Failure to do so will result in a risk of laceration. Refer to the Ninja Owner’s
Guide for additional information.
Once a container is locked onto base, the program buttons compatible with that container will illuminate.
PARTS
PRECISION PROCESSOR
™
BOWL
ASSEMBLY
BLEND & ENJOY
DOUGH
BLADE
ASS E M B LY
3 Align arrows
on bowl lid
and handle,
then lower
handle to
lock in place.