User Manual

For how-to videos and more, visit ninjakitchen.com Questions? 1-877-646-5288 32
SINGLE-SERVE FRESHVAC
™
CUP
1 Fill Single-Serve
FreshVac Cup with
desired contents.
2 Place Pro Extractor
Blades® Assembly on
cup and rotate clockwise
until tightly sealed.
1 Select any of
the illuminated
programs to
begin blending.
3 Flip cup
upside down
and lower
it onto base.
2 When blending is
complete, turn cup
counterclockwise
and lift to remove.
WARNING: Handle the Pro Extractor Blades Assembly with care, as the blades are sharp.
4 Turn cup
clockwise
to lock
in place.
3 Turn blade
assembly
counterclockwise
to remove.
4 Place spout lid on
top of cup and turn
clockwise to lock
in place.
ASSEMBLY
BLEND & ENJOY
Connect the base to power source. Press and hold Power symbol. After the unit is turned on,
display will flash “
” until the cup is correctly connected to the base.
SINGLE-SERVE
FRESHVAC CUP
SPOUT
LID
PRO EXTRACTOR
BLADES® ASSEMBLY
PARTS
Once a container is locked onto base, the program buttons compatible with that container will illuminate.
WARNING: Handle the blade assemblies with care when washing, as the blades are
sharp. Contact with the blades’ edges can result in laceration.
5 To release the pump from the cup, press
the pump release button on the bottom
front of the pump and lift. Click the Flip &
Seal Lid closed.
1 Fill the cup as desired
and assemble the
Pro Extractor Blades®
Assembly on top of
the cup.
3 Open the Flip & Seal Lid by
pressing and lifting the latch.
Set the FreshVac Pump on
top of the FreshVac Tab. The
pump DOES NOT lock into
place on the lid.
4 Press the power button on top of the pump
to begin vacuum sealing. The pump will
shut o automatically once vacuum sealing
is complete.
INSTALLING THE BATTERIES IN THE FRESHVAC PUMP
1 Unscrew the
FreshVac Pump’s
power button cap
and remove the
spring-loaded
battery cover.
2 Install 6 AA alkaline
batteries (included),
ensuring the +/-
symbols on the
batteries match the
markings on the
battery cover and
battery housing.
3 Replace the battery
cover, making sure
it is fully seated and
clicked in place.
4 Screw on the pump’s
power button cap.
FRESHVAC
PUMP
2 Turn cup upside down so
the Flip & Seal Lid is on top
and the bottom of the blade
assembly is flat on
the counter.
7 Gently pull up on
the FreshVac tab to
release the vacuum
seal, then close the
Flip & Seal Lid.
8 Remove the Pro
Extractor Blades
Assembly and
screw the spout
lid clockwise onto
the cup.
6 Lock cup in place
on base and blend
as desired. Once
blending is complete,
remove the cup from
the base and place
the cup flat on
the counter.
FRESHVAC
TAB
VACUUM BLENDING WITH
THE SINGLE-SERVE FRESHVAC
™
CUP
WITH FLIP
& SEAL LID