User Guide

30 31nin jakitchen.com
USING THE SLICING/SHREDDING DISC
IMPORTANT: Review all warnings
on pages 2–5 before proceeding.
IMPORTANT: Use only the LOW
setting when using the Slicing/
Shredding Disc.
5 Use the finger holes to grasp the disc
and place it over the disc spindle.
4
Place the disc spindle inside
the bowl.
6 Place the feed chute lid on the
bowl and turn clockwise until you
hear a click, indicating the lid is
locked in place.
7 Touch the power button to turn the
unit on.
8 Select LOW on the control panel.
The disc will begin spinning.
NOTE: The feed chute lid features
a two-part pusher to guide food
through the chute. Use the full pusher
for larger items such as cucumbers.
Twist and pull to remove the smaller
pusher and use the narrow chute for
smaller items such as carrots.
NOTE: The Slicing/Shredding Disc
is reversible. Use the side labeled
“Slicer” for slicing. Carefully flip
the disc over to the side labeled
“Shredder” for shredding.
3 Secure the bowl onto the motor
base. Rotate bowl clockwise until
it clicks into place.
1
Place the unplugged motor base
on a clean, dry, level surface such
as a countertop or table. Press
downward on the motor base to
adhere the suction cups to the
work surface. Plug the motor base
into a wall outlet.
2
Lower the Precision Processor™
Bowl onto the motor base.