User Guide

26 27ninjakitchen.com
USING THE PRECISION PROCESSOR™ BOWL
IMPORTANT: Review all warnings
on pages 2–5 before proceeding.
3 Rotate the bowl clockwise until it
clicks into place.
1 Place the unplugged motor base
on a clean, dry, level surface such
as a countertop or table. Touch
downward on the motor base to
adhere the suction cups to the
work surface. Plug the motor base
into a wall outlet.
2
Lower the Precision Processor Bowl
onto the motor base. Align the bowl
so the handle is to the right, in a
diamond position.
4 Handling with care, grasp the
Chopping Blade Assembly by the
top of the shaft and place it onto
the spindle inside the bowl. Note
that the Chopping Blade Assembly
will fit loosely on the spindle.
NOTE: Pre-set programs have pauses
and changes in speed throughout
the cycle.
NOTE: DO NOT add ingredients
before installing the blade assembly.
TIPS:
• If the blade assembly is not fully
seated, you will not be able to install
and lock the lid into position.
• To learn more about the programs
that work with your Precision
Processor Bowl, refer to page 11.
NOTE: Follow the same instructions to
install the Dough Blade Assembly.