Quick Start Guide

For how-to videos and more, visit ninjakitchen.com Questions? 1-877-646-5288 54
IMPORTANT: Always measure with level scoops
of a medium grind size. Use fewer scoops when
brewing decaf coee. DO NOT use a paper filter in
conjunction with a permanent filter.
BREW BASKET AND NINJA POD ADAPTER ASSEMBLY
BREW BASKET MUST BE INSERTED WHEN USING GROUNDS OR PODS.
GROUNDS
PODS
OR
NINJA POD ADAPTER
Ensure adapter is in the REMOVE position
before installing. Always insert over the
brew basket when brewing pods.
INSERT FILTER
Fold the #4 paper cone filter along the seams,
open the top fully, then insert filter firmly
into the brew basket.
BREW BASKET
Must always be inserted when
brewing pods or grounds.
BREW BASKET
Must always be inserted when brewing pods
or grounds. Do not insert a filter.
NINJA SMART SCOOP™
The Ninja Smart Scoop is used for accurately measuring coee grounds. The numbers beside the icons
show the number of level scoops recommended for each brew size.
SERVING SIZE NINJA SMART SCOOP
GROUND COFFEE
2–3 small scoops
3–5 small scoops
3–5 big scoops
4–7 big scoops
2 big scoops
Specialty 4 oz.
The Intelligent Warming Plate will automatically turn on while
brewing a Classic or Rich brew on any Carafe size and remain
on for 2 hours. To adjust how long the Intelligent Warming
Plate remains on (up to 4 hours), refer to the Owner's Guide.
When the Intelligent Warming Plate is on, it can be turned
o manually by pressing KEEP WARM.
It can be turned on manually by pressing KEEP WARM
while a Classic or Rich brew and any Carafe size is selected
while in Grounds or Hot Water mode.
IMPORTANT: The
light on the base of the brewer will illuminate only when the warming plate is
hot and will remain illuminated until the plate has cooled down.
CUP, MUG, OR CARAFE
TRAVEL MUG
& XL SIZES
Place an XL Cup,
Travel Mug,
or XL Tumbler on
the base of
the brewer.
CARAFE
Place the carafe
on the Intelligent
Warming Plate.
The water reservoir can be positioned to the right or along the back of the brewer to optimize counter
space.
POSITIONING THE WATER RESERVOIR
STEP 2.
Swing the reservoir base
around the brewer until
it clicks into place.
You may feel some
resistance. Then,
rotate the removable
latch 180 degrees and
reinsert it in the new
gap where the base was
previously positioned.
CUP
Pull down the
cup platform to
set a mug on it.
STEP 1.
Remove the
reservoir from
the base. Remove
the removable latch
from the back of
the brewer.
Back of brewer
Side of brewer
INTELLIGENT WARMING PLATE