User's Manual

12
www.ninjakitchen.com
USINGTHE4-BLADEASSEMBLY
1 Holding the 4-Blade assembly by the shaft, place it
onto the gear shaft inside the bowl. Ensure that the
attachment fits around the gear shaft and that it is
standing straight.
2 Add the ingredients and secure the bowl lid onto
the bowl. (Fig. 1)
3 Plug the power cord into the electrical outlet and
press on the power button (
).
4 Select the speed that best suits your needs. Pulse
ingredients for even chopping by pressing down in
short intervals.
NOTE: Please refer to “Speed Settings & Uses”
chart for suggested uses and speeds.
5 When you have reached your desired consistencey,
stop the appliance by pressing the power button
( ) and wait for the blade to stop turning.
6 To remove the lid, pull the lid handle up to a 90°
angle and lift the lid off. Turn the bowl counter
clockwise and then lift off the base. (Fig.2,Fig.3)
Fig. 1
Suction
Lever
Fig. 4
USE
Activate
Suction
Release
Suction
Fig. 4a
Fig. 4b
DOUGH
BLEND
CRUSH
DOUGH
BLEND
CRUSH
USING THE DOUGH BLADE
IMPORTANT: Use only the “DOUGH” button when
using this attachment.
IMPORTANT: Use the suction lever when using the
dough blade on SPEED 1/DOUGH.
1 Place the motor base on a clean, dry, level surface such
as a counter or table top. (Fig.4) Push the suction
lever on the side of the motor base down to secure the
suction feet to the surface. (Fig.4a) If the suction feet
have not totally adhered to the surface, press down
lightly on the base to give the suction feet a better grip.
2 Secure the bowl onto the motor base.
3 Holding the dough blade by the shaft, place it onto the
gear shaft inside the bowl. Ensure that the attachment
fits around the gear shaft and that it is standing
straight.
4 Add the ingredients and secure the bowl lid onto the
bowl.
NOTE: For best results add wet ingredients first and
then add dry ingredients.
5 Plug the power cord into the electrical outlet and press
on the power button (
).
6 Once finished making dough, remove the bowl from the
motor base. (Fig.2,Fig.3)
7 To release the motor base from the counter or table
top, pull the suction lever up to release the suction feet.
(Fig.4b)
NOTE: The suction lever activates the suction feet for
added stability.
DOUGH
BLEND
CRUSH
Fig. 2
DOUGH
BLEND
CRUSH
Fig. 3
REMOVAL
USE