Use & Care Guide

12
www.ninjakitchen.com
USINGTHE4-BLADEASSEMBLY
1 Holding the 4-Blade assembly by the shaft,
place it onto the gear shaft inside the bowl.
Ensure that the attachment fits around the
gear shaft and that it is standing straight.
2 Add the ingredients and secure the bowl lid
onto the bowl. (Fig. 1)
3 Plug the power cord into the electrical outlet
and press on the power button (
).
4 Select the speed that best suits your needs.
Pulse ingredients for even chopping by
pressing down in short intervals.
NOTE: Please refer to “Speed Settings &
Uses” chart for suggested uses and speeds.
5 When you have reached your desired
consistencey, stop the appliance by pressing
the power button
(
) and wait for the blade to stop turning.
6 To remove the lid, pull the lid handle up to a
90° angle and lift the lid off. Turn the bowl
counter clockwise and then lift off the base.
(Fig.2,Fig.3)
Fig. 1
Suction
Lever
Fig. 4
USE
Activate
Suction
Release
Suction
Fig. 4a
Fig. 4b
USING THE DOUGH BLADE
IMPORTANT: Use only the “DOUGH” button when
using this attachment.
IMPORTANT: Use the suction lever when using the
dough blade on SPEED 1/DOUGH.
1 Place the motor base on a clean, dry, level surface
such as a counter or table top. (Fig.4) Push the
suction lever on the side of the motor base down to
secure the suction feet to the surface. (Fig.4a) If the
suction feet have not totally adhered to the surface,
press down lightly on the base to give the suction
feet a better grip.
2 Secure the bowl onto the motor base.
3 Holding the dough blade by the shaft, place it onto
the gear shaft inside the bowl. Ensure that the
attachment fits around the gear shaft and that it is
standing straight.
4 Add the ingredients and secure the bowl lid onto the
bowl.
NOTE: For best results add wet ingredients first and
then add dry ingredients.
5 Plug the power cord into the electrical outlet and
press on the power button (
).
6 Once finished making dough, remove the bowl from
the motor base. (Fig.2,Fig.3)
7 To release the motor base from the counter or table
top, pull the suction lever up to release the suction
feet. (Fig.4b)
NOTE: The suction lever activates the suction feet
for added stability.
Fig. 2
Fig. 3
REMOVAL
USE
BL771_30_BL771C_30_IB_ENG_120724_5.indd 12 12-07-24 9:44 AM