User's Manual

1212
TOLL FREE: 1-877-646-5288
USING THE DOUGH BLADE
IMPORTANT: Use only the “DOUGH”
button when using this attachment.
IMPORTANT: Use the dough station
when using the dough blade on SPEED
1/DOUGH.
1 Place the dough station on a clean, dry,
level surface such as a counter or table
top with the locking tab in the back.
(Fig. 10) Press down to secure the
suction feet to the surface.
2 Place the motor base inside the dough
station and push down until you hear it
click into place. (Fig. 10)
3 Secure the bowl onto the motor base.
4 Holding the dough blade by the shaft,
place it onto the gear shaft inside the
bowl. Ensure that the attachment fits
around the gear shaft and that it is
standing straight.
5 Add the ingredients and secure the bowl
lid onto the bowl. (Fig. 11)
NOTE: For best results add wet
ingredients first and then add dry
ingredients.
USING THE 4-BLADE ASSEMBLY
1 Holding the 4-Blade assembly by the
shaft, place it onto the gear shaft inside
the bowl. Ensure that the attachment
fits around the gear shaft and that it is
standing straight.
2 Add the ingredients and secure the bowl
lid onto the bowl. (Fig. 9)
3 Plug the power cord into the electrical
outlet and press on the power button ( ).
NOTE: Please refer to “Speed Settings
& Uses” chart for suggested uses and
speeds.
Fig. 9 Fig. 11
Using the Bowl
Fig. 10
Locking
Tab
NJ602_series_30_IB_ENG_120427_2.indd 12 12-04-30 8:44 AM