User Manual

ManualsBrandsNinja ManualsSmall Kitchen AppliancesProfessional Blender with Single Serve Accessories

1-877-646-5288

Care & Maintenance

HOW TO STORE

1 Store the Ninja

Professional Blender upright with the

blade assembly inside the corresponding container with

the lid secured on top. Do not place anything on top.

Store the rest of the attachments in a safe place where

they will not be damaged and won’t cause harm. Insert

the power cord into the cord storage area located in the

back of the motor base.

NOTE: Do not store blended or unblended

ingredients in the Nutri Ninja cup with the blade

assembly attached.

Cord Storage

RESETTING THE MOTOR THERMOSTAT

The Ninja

Professional Blender features a unique safety

system which prevents damage to the unit’s motor and drive

system should you inadvertently overload your appliance.

If the appliance is being overloaded, the motor will

stop. Allow the appliance to cool for approximately

15 minutes. To reset the appliance, follow the resetting

procedure below:

1 Unplug the appliance from the electrical outlet.

2 Remove and empty the container and ensure that no

food is jamming the blade assemblies.

3 Allow the appliance to cool for approximately 15

minutes.

4 Re-install the container onto the base and re-plug the

appliance into the electrical outlet.

5 Proceed to use the appliance as before making sure not

to exceed the recommended maximum capacities.

HOW TO CLEAN

CAUTION: Make sure that the motor base is

unplugged from the power source before inserting

or removing any attachment and before cleaning.

CAUTION: DO NOT immerse the motor base into

water or any other liquid.

1 Separate/remove all parts from each other.

2 Hand Washing: Wash the lids, pitcher, Nutri Ninja

cups and blade assemblies in warm, soapy water.

When washing the blade assemblies, use a dish-

washing utensil with a handle to avoid direct hand

contact with blades. Handle blade assemblies with care

to avoid contact with sharp edges. Rinse and air dry

thoroughly.

Dishwasher: The containers, lids and blade

assemblies are all dishwasher safe. The lids and blade

assemblies are top rack dishwasher safe. Ensure the

blade assemblies are removed from the containers

before placing in the dishwasher.

WARNING: Handle the blade assemblies with care

when washing, as the blades are sharp. Contact

with the blades’ edges can result in laceration.

3 Wipe the motor base clean with a damp cloth

Please call customer service if any servicing needs to

be performed on the appliance at 1-877-646-5288.