Use and Care Manual

8
www.ninjakitchen.com
USE REMOVAL
8 Holding the lid by the handle in the upright position,
place it on top of the pitcher aligning the arrow ( )
located on the lid with the arrow ( ) located on the
bowl’s handle. (Fig. 5)
9 Use the control panel according to your blending
requirements:
• Turn the knob to the “ON” position to continually
process the ingredients to a smooth mixture.
• Turn the knob to the “PULSE” position for controlled
processing.
• Turntheknobtothe“OFF”positiononceyouare
finished processing.
NOTE: If you need to add additional ingredients while
the appliance is processing, open the pouring spout
cap and pour the ingredients in through the opening.
10 When you have reached your desired consistency, stop
theappliancebyturningtheknobtothe“OFF”position
and wait for the blades to stop turning.
11 To remove the lid, pull the lid handle up to a 90° angle. Turn
the pitcher clockwise to lift off the base. (Fig. 6, Fig. 7)
Fig. 5
Locking Handle
CAUTION: Never insert your hands in the pitcher as the
blades are sharp. Always use a spatula to dislodge
food that has stuck to the sides of the pitcher.
12 Depending on the consistency of the contents in
the container, open the pouring spout cap and
usethespouttoemptyliquidcontents.Forthicker
consistencies, remove the lid and attachment carefully
(by its shaft), then empty contents from the container.
CAUTION: Blades are not locked in place. If using
the pour spout, ensure the lid is fully locked onto the
blender pitcher.
13 Forthickerconsistencies,removethelidandblade
attachment carefully (by its shaft), then empty contents
from the container. To remove the lid, press the release
button on the lid and pull the lid handle up to a 90°
angle and lift the lid off the blender pitcher.
CAUTION: Blades are not locked in place. If
pouring with the lid removed, ALWAYS remove the
blade assembly first.
14 Make sure that the unit is unplugged when not in use.
Fig. 7
Fig. 6
OFF
PULSE
ON