Terms and Conditions
Connecting your Smart Socket to Wi-Fi
1. Plug your Wi-Fi Smart Socket into an electrical socket
and Switch it on.
2. Open up your app and select the + Icon on the top right
of the App to add device.
3. Select “Plug” as the Device Type. The App can also be
used to control other compatible Smart Devices.
4. Select “Plug” as the Device Type. The App can also be
used to control other compatible Smart Devices.
Select “Finish Network Configuration” when the blue LED
is flashing quickly.
If the blue LED light isn’t flashing quickly when
you’ve plugged in your Smart Socket keep the
Power button in the centre of your Wi-Fi Smart
Socket pressed for 5 seconds to reset the device.
5. The App will automatically detect the Wi-Fi network you
are connected to. Enter the password of the Wi-Fi
Router you are connected to.
Click “Next” when you’ve entered your Wi-Fi
password and the blue LED light is flashing
every two seconds
6. Once paired, you will see the following screen
with the device you have successfully added.
If you do not see this message repeat from
Step 1 or refer to the FAQS at the back of the
manual for more information.
Note: The configuration process should take
about 1 minute Max.
CORRECT DISPOSAL OF BATTERIES IN THIS PRODUCT
This marking on the product, accessories or literature indicates that the product
and its electronic accessories should not be disposed of with other household waste.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate these items from other types of waste and recycle
them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their government office, for details of where and how they can take these
items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of
the purchase contract. This product and its electronic accessories should not be
mixed with other wastes for disposal.
This marking on the battery, manual or packaging indicates that the batteries in this
product should not be disposed of with other household waste. Where marked, the
chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium
or lead above the reference levels in EC Directive 2006/66. If batteries are not
properly disposed of, these substances can cause harm to human health or the
environment.
Registration
You’ll need to register an account on your “smart life” app
before you can connect your Wi-Fi Smart Socket.
1. Open the App on your IOS / Android device
2. Ensure you click on ALLOW to
enable you to control your Wi-
Fi Smart Socket.
3. Please register by clicking on Register in the top
right corner of the App. You will be prompted to
enter your mobile number or email address to
register. Note: If you use a Mobile number you will
be sent a text message with your confirmation code
to complete your account registration.
4. Once you receive your confirmation code type it in
along with a password for the “smart life” App and
select confirm. You can use this to log in to APP.
5. You are now ready to set up your Wi-Fi Smart
Socket.