Use Instructions

— 11 —
Hall swith
Probe switch
activation slot
Probe indicator
Figure 2.4 The position of the activated magnetic switch is shown on the left. Theright is placed
● sensor is turned off when the. The operation mode is the same as when the probe is turned
on. When the probe is turned off, the indicator on the probe is off.
2.4 Initiating the biofeedback training
● When the probe is turned on, press the “BioFeedback” icon to proceed to the
biofeedback training login interface.
● For first time use, you need to register.
● After logging in, on the My Data page, click the menu in the upper left corner and select
"Training" from the pop-up menu, as shown in the operations on Figures 2.5 and 2.6 below:
Caution
◆
Do not pinch the probe to avoid damaging the sensors
◆
After use, turn off the device to prevent depleting the battery