Use Instructions

Ningbo Fengsheng Electronics Co., LTD

WIFI smart socket manual

1、 Product description

WIFI smart socket is a socket that can connect to the Internet through WIFI wireless network and

realize network control of electrical power supply. In any place where there is a network, users

can achieve power on and off control and status display through the smart phone client, while

the client also supports the control of multiple sockets. WIFI smart socket adopts the patent

technology of Smart Config to access the network, which is easy to configure and supports

multiple timing tasks at the same time. Enjoy the wireless enjoyment of WIFI smart socket by

controlling water dispensers, electric kettles, fans, lights and rice cookers locally or remotely.

2、Instructions for use

1)、Enter the network configuration mode: after opening the socket power for 3 seconds, press

the switch for another 6 seconds, and the indicator light will enter the fast flashing state, and

then release the switch until the APP displays the successful configuration.

2)、 When the socket is connected to the network through the customer service side of the

phone, if the backlight with the key on is in a slow flash state, it means that the socket is

connecting to the router, and the backlight is always on after successful connection.

3)、After the network access is successfully configured, the user can control through the mobile

phone client. If the backlight is red at the on-off key, the socket is on; if there is no backlight at

the on-off key, the socket is off.

4)、The user can also control the on/off state of the socket by turning the key on. If the user

presses the on/off key and the back light of the on/off key is red, the socket is in the on state; if

the back light of the on/off key, the socket is in the off state.

5)、 After the socket is successfully connected to the network, there is no need to reconfigure the

connection after power failure. The socket will actively join the wireless router.

6)、Please refer to the "Help" in the client software for the specific access method and

configuration.

PAGE 1
Ningbo Fengsheng Electronics Co., LTD WIFI smart socket manual 1、 Product description WIFI smart socket is a socket that can connect to the Internet through WIFI wireless network and realize network control of electrical power supply. In any place where there is a network, users can achieve power on and off control and status display through the smart phone client, while the client also supports the control of multiple sockets.
PAGE 2
3、 Product parameters Model SY-AP4, SY-AP4C Current: Max. 15A Voltage: 125 V / 60 Hz Max power 1875W Frequency Band: 2400-2483.5MHz Static power loss: < 0.8W Working environment Temperature: 0~40℃ Humidity: 10% to 95% Wireless standard: 802.
PAGE 3
6、The FCC warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.