Instruction Manual

3. After testing, switch on the power supply, manual button LED will flash, device is under adding
mode
4. download the enbrighten app and create your account, add the device by following the guide in
app
5. after adding successfully, you can control the light and GFCI outlets via app
6. you can press and hold the manual button over 10 seconds to reset the product
E. Specification
Power rating: 125V~ 60Hz
Power load: GFCI, 1875W; light output 625W
Difference between every model:
ES26-GP: with manual ON/OFF switch, GFCI, 3 wires to connect lamp, without Wi-Fi function
ES26-OP: with manual ON/OFF switch, 3 wires to connect lamp, without GFCI☆, Wi-Fi function
ES26WF-GP: with manual ON/OFF switch, GFCI, Wi-Fi function, 3 wires to connect lamp.
ES26WF-OP: with manual ON/OFF switch, Wi-Fi function, 3 wires to connect lamp, without GFCI☆
ES26WF-G: with manual ON/OFF switch, GFCI, Wi-Fi function, without 3 wires to connect lamp.
ES26WF-O: with manual ON/OFF switch, Wi-Fi function, without GFCI☆, 3 wires to connect lamp.
ES26WF-P: with manual ON/OFF switch, Wi-Fi function, 3 wires to connect lamp, without GFCI
☆means users can add GFCI by themselves.
F. WEEE
Manufacturer :
Manufacturer: Ningbo EverFlourish Smart Technology Corp. Ltd.
Address: 77 Wuxiang East Road, Yinzhou, Ningbo, 315111, P.R.China