Instruction Manual Junction box Item no. ES26XX-XX A. Functions 1. GFCI socket and connected light B. Diagram 3 2 4 1 Button 1. manual button 2. plugin terminal (black & white wire) 3. screw terminal (black & white wire) 4. screw terminal (yellow & green wire) Function With LED indicator, can control the junction box power supply ON/OFF Switch to W-Fi pairing mode To connect the external input wire To connect light’s wire To connect the light’s ground wire C. Installation 1.
. Use a screw to lose the screws on the back and take off the back cover. 3. Install the fixing plate on to your existing junction box, if you don’t have a junction box , can install the our junction box on the surface directly. 4. Put on the Waterproof gasket and connect the wire (UL14AWG) 5. Fix the junction box and then install the back cover and tighten the screw.
6. Fix the other fixing plate onto the back cover 7. Connect the wires of junction box and light, then install the light on the fixing plate PS: install our junction box directly on the wall, please see below.
Use two screws to fix the junction box on surface via the two holes on the product D. Instruction 1. GFCI test: press the holder and open the waterproof cover and press the TEST button, LED indicator ON, then press RESET button. 2. Connect the plug, need to open the cover, and take off the panel, then you can insert the plug into the outlet and close the cover.
3. 4. 5. 6. After testing, switch on the power supply, manual button LED will flash, device is under adding mode download the enbrighten app and create your account, add the device by following the guide in app after adding successfully, you can control the light and GFCI outlets via app you can press and hold the manual button over 10 seconds to reset the product E.
This device complies with part 15 of the FCC Rules & Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.