User's Manual

Bluetooth Pairing and Use Instructions
1. Press and hold button more than 3 seconds to turn on the speaker.
2. The speaker will keep and the LED light will flash blue. It is now ready to pair
with your device.
3. Turn on Bluetooth on your device. Your device will search for any Bluetooth
devices in range. You should select “#2731”. The blue LED light will turn off
when successfully paired.
4. Music volume can be controlled by adjusting the volume on your device,
5. You can PAUSE and RESUME by pressing once button.
6. When you use your telephone through Bluetooth speaker, the button is for
pick up and hang up.
7. If your speaker has been paired previously with another device within the
effective range (30ft), then the original pairing must be removed. This is done
by deleting or forgetting the Bluetooth settings of the original device.
8. If the device moves beyond the effective range, the Bluetooth connection will
be disconnected. Once the device and speaker are back in effective range, you
will need to again establish the Bluetooth connection between the device and
the speaker.
9. Press and hold button more than 3 seconds to turn off the speaker when you
don’t use it.
Product Specifications
 Model: SL010，2731
 Up to 2 hours of playback time
 Input: DC 5V/250mA
 Charging time: 2 hours
 Speaker power: 3W
 Frequency response: 20Hz-20KHz
 Lithium battery capacity: 250mAh
 RF range: <30 ft. of wireless range
 Bluetooth V2.1+EDR