User's Manual

Control Devices - Individual Control
NO.4.1
Click "Add to shared", enter the account to share devices
with, and click OK to finish. To stop sharing with an
account previously added, press and hold to delete in
Android, or slide to the left to delete in IOS.
1. Click "Create Group" under "More" on a selected device
page, as shown in Fig. 1.
2. The page displays all devices with the same model
number and available to be added as a group. Select a
device and click Save, then enter group name and click
OK to finish, as shown in Fig. 2.
3. When a group has been created successfully, the page
will be automatically redirected to the group control panel
in Fig. 3, where grouped devices can be managed.
Control Devices - Group Control
NO.4.1
1. Groups that have been created can be viewed on the
"My Household" page, and managed with hotkeys.
2. Open the group control panel as shown in Fig. 2.
3. Click "..." at the top right corner to configure or remove
groups, as shown in Fig. 3.
Control Devices - Group Control
NO.4.1
Click the "Smart Scenes" at the bottom of page-Fig 1, then
enter into the next page-Fig 2, click "+" at the top right
corner and select "Automation" to go to the smart
configuration page, as shown in Fig. 3
Click "+" as shown in Fig. 3 to add multiple conditions or
multiple actions.
Smart Features - Automation
NO.5.1
Add condition:
For example, to add temperature as a condition, select
temperature as shown in Fig 1, configure temperature-
related conditions as shown in Fig. 2, and then click
“Next" to add the condition as shown in Fig. 3.
Smart Features - Automation
NO.5.1
Fig 1 Fig 2 Fig 3
Add action:
Click "Add action" or "+" at the top right corner to open the
menu, as shown in the following Fig. 1. There are four
action types: scenario, automation, device, and push
notification
Conditions and actions of automation can all be set up
as shown in following Fig. 2.
The system primarily supports three types of automation:
1. Inter-device synchronization, such as turning on the
aroma diffuser and air purifier automatically at the same
time the A/C unit is turned on.
2. External environment and device synchronization, such
as turning on the A/C unit automatically when the
temperature falls below 0°C.
3. Timed actions, such as drawing back the curtains
drawn automatically at 8:00 am every morning.
Fig 1
Fig 2
Select a scenario as shown in Fig. 1 and go to the
configuration page. As shown in Fig. 2, you can edit the
scenario name. Click "Add action" or "+" at the top right
corner to add an action.
The action menu is shown in Fig. 3. Configuration is similar
to that of automated devices.
Smart Features - Scene
NO.5.2
Fig 1
Fig 2
Fig 3
To configure a scenario with "Trigger automation", you
must set up an automated scenario in advance. If existing
automation options are available as shown in Fig. 1, select
"Trigger and activate" or "Trigger and deactivate".
Then, click "Next" and enter scenario name, and click
“Save" at the top right corner to finish configuration.
Smart Features - Scene
NO.5.2
Fig 1 Fig 2
Previously configured automation and scenarios are
displayed in the "Smart Features" page.
Click "Edit" at the top left corner to modify existing
scenarios and automated devices.
For example, click "Modify scenario" to go to the page
shown in Fig. 2, where the order of scenarios can be
changed and scenarios can be deleted by sliding left.
(In iOS, click "-" on the left of scenario name to delete.)
Smart Features - Add/Modify/Delete
NO.5.3
Edit a scenario: Click "..." as shown in Fig. 1 to go to the
Edit page.
Edit automation: Click anywhere on the background of
automation, as shown in Fig. 1, to go to the Edit page. Go
to the automation edit page shown in Fig. 2. Slide left to
delete previously added conditions or actions, add new
conditions or actions, or delete the smart feature entirely.
Fig 1 Fig 2
Add various types of
devices
Supports voice
command
Switch between rooms in
a household
View status of smart
devices in each room
One-key activation for
smart scenarios
Easy switch between
everyday scenarios
For users with multiple
households
Able to switch
between/add
households
My Household
NO.6
Personal settings is the user's portal to managing
personal information and shows the following information:
1. Household Management
2. Message Center: feedback results, shared news,and
devices supporting notification
3. ScanQR Code: Some devices support QR code scanning.
4. FAQ: Frequently Asked Questions
5. Feedback: Report problems encountered during usage
here.
6. Settings
Profile(Me) page
NO.7
Settings-About
NO.7
The About page displays app information as follows:
1. Click "Rate us" to go to the app store and rate the app.
2. Privacy Policy
3. Open Source License
4. Current Version
The Integration page displays “ Amazon alexa”, “Google
Assistant”, “IFTTT”, and so on operation instructions.
You only need to click “ Find More” will be the operation
details reference.
Personal -Settings
NO.7
The Personal Settings page shows your account
information. Here you can change your password, link your
mobile number to your account, configure your gesture
password, and terminate your account
Click "Gesture Unlock" to set up a gesture password.
Once a gesture password is activated, you will have to
use the gesture to access the app. If you forgot your
gesture password, click "Forgot Gesture Password" to
have an authentication code sent to your registered
mobile phone number. Enter the code and set up a new
gesture password to continue.
Personal Settings-Gesture Password
NO.7
Made in China
15 16 17 1
8 19 20 21 22 23 24 25 26
14
Gest ure pass wor d
Set ti ngs
About
BHZ0320U-wifi App User Manual
Simplified steps to install app on your smart
device and pair with Amazon Alexa,
Google Assistant and IFTTT using
Smart Life App on
Apple Store/Google Play Store.
Compatible with any smart phone or tablet
including both Android and iOS systems.
●
Instead of reaching for outlets and plugs every time, you
can easily switch your electronics, set timer and
countdown, create scenes, share the device with your
families at your fingertip. Perfect for hard-to-reach
appliances & devices without ON/OFF switches.
Manage Your Home Remotely: Instantly control devices
connected to the Smart Plug wherever you have Internet
using the free app on your smart phone, Enjoy peace of
mind by checking on your devices remotely and always
coming home to a well-lit house.Works with Alexa and
google assistant for voice control.
Set Timer: Schedule the Smart Plug to automatically
power electronics on and off as needed, like setting lights
to come on at time you back home.
Create Unique Scenes: Schedule the smart switch to
automatically power electronics on and off as needed, like
setting lights to come on at dusk or turn off at sunrise.
For Optimal Use:
1. If the indicator on smart device doesn't flashing when
you plug into the power socket for first connection, please
hold and press the power button which on the top front of
the smart power strip for about 5-10seconds to see if it's
start flashing;
2. If the smart device can't be connected to WiFi, please
long press ON/OFF button for 5~10 seconds to reset the
●
●
●
smart power strip;
3.The smart power strip only work with 2.4 GHz network.
If your router broadcasts both 2.4 and 5GHz, please
selected the 2.4GHz network with the app. If connection
still failed, we recommend you call your ISP and had them
completely shut off the 5 GHz network on the router; You
are free to change the network to 5 GHz again after
connecting;
4. Please try to make the smart power strip and router as
close as possible when first connection, you can change
the place after connecting successfully.
What’s the meaning of each status of LED indicator on
socket?
RED LED is off
LED Status
Function
Blue LED blinks slow ly until off Configuration is successful
Blue LED blinks rapidly
Resetting / Enter into
network configuration
RED LED is on Power is on
Power is off
Blue indicator flashes slowly means the network
connection is abnormal, please check the router or
network configuration.
●
●
●
Short press the power button, the RED power led
indicator will be ON or OFF correspondingly.
Long press the power button for about 5 seconds
until the blue indicator flashes rapidly, means the
socket begins to enter into the network configuration
mode.
Scheduling Program
Wi-Fi Controlled Appliances Set Time
Sha re wi th
fami ly mem bers
Fami ly
Shar e
NO.1
Download App
To download the app, search for "Smart Life" in any app store
, or scan the QR code below
NO.2
Registration/Login/Password Retrieval
Log in
Regi ster
Registration
If you do not have an app account, you may choose to
register or log in by text message authentication. The
registration process is described on this page and the
next.
1. Click ‘Create account’to go to the Smart Living
privacy policy page. Click Agree to proceed to the
mobile phone number registration page
2. The system will identify automatically the
country/region you are in, or you may choose
to select manually a country/region. Enter
your mobile phone number or email and click
‘Next’, as shown in Fig. 2
NO.2
Registration/Login/Password Retrieval
Fig. 1
Fig. 2
Fig. 3
2. The system will identify automatically the country/
region you are in, or you may choose to select manually
a country/region.Enter your mobile phone number or
email and click "Get code", as shown in Fig. 1
3. Enter the authentication code you received. Then
enter the password and click "OK" to complete
registration.
Account ID + Password Login
If you already have an app account, click
‘Log in with existing account’ to proceed
to the login page
1. The system will identify
automatically the country/region you are
in, or you may also choose to select
manually a country/region
2. Enter the mobile phone number or
email you have registered and enter the
password in to log in
If you have already installed WeChat on
your mobile phone, click the WeChat icon
in Social Login and proceed through the
authorization page to log in.
Third-Party Social Login (China only)
NO.2
Registration/Login/Password Retrieval
Mobi
le Phone Number +
Authentication Code Login
1. Click ‘Authentication Code Login’in Fig. 1 to go to the
next page.
2. The system will identify automatically the country/
region you are in, or you may also choose to select
manually a country/region
3. Enter your mobile phone number or email and click ‘Get
code’, as shown in Fig. 2
4. Enter the authentication code in the text message or
email to log in, as shown in Fig. 3
Fig. 1 Fig. 2 Fig. 3
Forgot Password
If you forgot your app password, you can reset your
password by following the Password Retrieval procedure
1. Click ‘Forgot Password’, as shown in Fig. 1
2. The system will identify automatically the country/
region you are in, or you may choose to select manually a
country/region. Enter the mobile phone number or email
you used to register and click ‘Get code’, as shown in Fig.
NO.2
Registration/Login/Password Retrieval
Fig. 1 Fig. 2
3. Enter the authentication code sent to your mobile phone
number or email, as shown in Fig. 3
4. Enter the new password and click ‘OK’ to log in, as
shown in Fig. 4
Fig. 3 Fig. 4
Fig. 3 Fig. 4
Fig. 1 Fig. 2
NO.3.1
Household/Member Management
1. When logged in, click ‘Activate Smart Living’ to go to
the "Add Household" page, as shown in Fig. 1
2. "Household Name" can be entered manually, as
necessary. Click "Household Location" to go to the map.
Move the household icon manually to change the address.
Click "OK” to confirm the address, as shown in Fig.2
3. Click "Add Room" to add a room, as shown in Fig.3
Click "OK" at the top right corner to complete room
settings. Room settings can be changed anytime by
clicking on "My Household", as shown in Fig.4
NO.3.2
Adding Devices - All Devices
Click "A dd Device" on the app home page or the "+ " sign
at the top right corn er to go to the "All Devices" page,
where devices can be selected and added as necessary
There are two network configuration modes:
Default Mode(Quick mode) and AP Mode(Compatibility
mode) are available for you to choose before adding the
device to app. Default Mode (Quick mode) is recommended.
1. If you configure the network in Default Mode(Quick
mode),please confirm that the device blue indicator is
blinking rapidly (2 times/second), then click the confirm
button to go to the next step.
2. If the blue indicator is not blinking rapidly (once every 3
seconds),then click’How to make indicator rapidly blink’
to see the procedure or press and hold the power button
on the smart plug for about 5 seconds until the indicator
blinks rapidly.
3. Follow the in-app instructions to connect the Smart
device to your WI-FI network.
5.Select the Wi-Fi in the work area of a device that can
enable successful Internet connection, enter the Wi-Fi
password, and click "OK" to proceed to configuration
Fig. 1
Fig. 2
6. If Default mode(Quick mode) is selected, app
configuration will be completed as shown in Fig. 1.
Successful configuration will appear as shown in Fig. 2.
Names of devices that have been configured successfully
can be changed, and the locations of the rooms where the
corresponding devices are can be selected.
The App is supported only 2.4GHz Wi-Fi Chann els
Change Netw ork
Confi rm
7. Click’Done’,now you can control the smart device
through ‘Smart Life’ App.
8. Once the configuration is completed successfully, the
indicator light will turn to solid red and the device will be
added to the ‘ Device List’.
Default Mode (Quick mode):
AP Mode (Compatibility mode):
1.To select "Compatibility mode",please make sure the
indicator light on the smart device is flashing slowly
(blinking once every three seconds) and then click the
button to proceed to the next step.
2. If it blinks blue rapidly (twice per second),press and
hold the power button on the smart device for 6 seconds
until the indicator light blinks slowly, or click "How to set
indicator light to slow flashing" to view the instructions.
3. Click ‘AP Mode’ at the top right corner will be in AP
mode,
How to make ind icato r slow ly blink
4. When in Compatibility (slow flashing) mode, you can
select hotspot configuration, but connection must be
made with the Wi-Fi hotspot whose name begins with
‘SmartLife’, as shown in the figure
Note: Some hotspot names may be user-defined
If configuration fails, it will appear as shown in the figure.
You can choose to add again or go to help for
troubleshooting assistance
Adding Devices - Failure
Connect phone to device’s wifi
hots pot
1. Open WL AN S et tings
Smart L ife _XX XX
Open the control panel for devices. For example, Fig. 1
shows the socket is off, and only the timer can be accessed
in the off mode. Fig. 2 shows the light is on,and timer can
be configured in the on mode. Click "..." at the top right
corner of the control panel to manage individual devices.
Control Devices - Individual Control
NO.4.1
Fig 1 Fig 2
The device modification menu is shown in the figure:
1. Change basic information: You can change the name
and location of a device.
2. Shared devices: You can share any individual device
with others by entering their mobile phone numbers.
(Note: Their mobile phone numbers must be registered
with Tuya app accounts.)
3. Create group: Click and the page will automatically
show all devices that have been added and have the
same model number. A group cannot
be created for devices with different model numbers.
4. Device information: Check here for: device ID, Wi-Fi
signal strength,IP address, Mac address, and device
time zone.
5. Feedback: You can submit feedback here on problems
encountered during usage.
6. Check for firmware upgrades: You can check here for
firmware updates.
7. Remove device: Delete a previously added device
from the list of devices.
8. Factory reset: Remove devices and clear all data.
Control Devices - Individual Control
NO.4.1
Working Voltage: 120V~/ 60Hz
Max. : 10A/ 1250W (Resi st ive load)
8A/ 1000W (Tungst en load)
Max. : 2. 4A (Si ngl e US B por t)
Max. :4. 5A (Total 3 US B por ts)
Wireless Type: Wi-Fi 2. 4G Hz
Cabl e spec ificat ions: 1. 5m , 14A WG
1 2 3
4
5
6
7
Click the pull-down arrow at the top left corner of ‘My
Household’to add a household and manage households.
One account can manage multiple households at the
same time. The user can operate a device in a household
by selecting it in the household menu.
NO.3.1
Household/Member Management
Click Chen's Household to go to the household
settings, as shown in the figure
8 9 10 11 12 13
Confi rm In dicat or ra pidly b link
Fig. 2Fig. 1
Log in
Regi ster
Thi s pr oduct incl udes 3 US B char ging por ts (max. 4.5A
shar ed) ,1 Al ways ON out let and 3 indi vi dual ly wi fi App
cont rol out let s, each por t char ges up to 2. 4A for tabl et s,
smar t phones and ot her devi ces . With over load and over
cur rent pr ot ect ion funct ion. With simpl e sur ge pr ot ect ion.
Should you have any issues or questions regarding your
New product, feel free to contact our Customer Support
Team. Your satisfaction is ours.
Outl et 1
Alwa ys ON WIF I Indiv idual ly Cont rol
1 2 3
Total Max .5V 4.5 A
Outl et 2 Outl et 3
Outl et 4
USB Po rts
Powe r button/
LED in dicator
WiFi Smart Power Strip with USB Charging
Troubleshooting and FAQ
1.What should I do after over-load use and
power off ?
What devices can I control with the
Smart Power Strip?
3. What should I do when I cannot turn the
Smart Power Strip on or off?
3. What should I do when device
configuration process has failed?
With advanced over current protection, the power
will be cut off automatically after over load use.
Please unplug the power plug from the power
socket and remove the over load device from the
power strip, then plug the power plug into the power
socket again after about 60 seconds, the power
strip will be automatically restored to use.
2.
You can control AV equipments(such as TV, DVD,
Stereo, TV satellite),table lamps, portable heaters,
games machines, etc appliances.
Make sure your mobile devices and the smart
power strip are connected to the same Wi-Fi
network.
Make sure the devices connected to the Smart
Power Strip are turned on.
You could:
Check whether the Smart device is powered on or
not.
Check whether your mobile device is connected to
2.4GHz Wi-Fi network.
Check your network connectivity. Make sure the r
outer is working properly:
If the router is dual-band router, select 2.4G
network and then add the smart device.
Enable the router’s broadcasting function.
Configure the encryption method as WPA2- PSK
and authorization type as AES, or set both as
auto.
Wireless mode cannot be 11n only.
Check for Wi-Fi interference or relocate the
Smart device to another location within the signal
range.
Check whether the router’s connected devices
reach the amount limit. Please try to turn off
some device’s Wi-Fi function and configure
Smart device again.
Check if router’s wireless MAC filtering function
is enabled. Remove the device from filter list and
make sure the router is not prohibiting Smart
device from connection.
Make sure the password of your Wi-Fi network
entered in App is correct when adding Smart
device.
Make sure the Smart device is in ready for App-
Config: the indicator light is quick blinking blue
(twice per second) for quick mode configuration,
slow blinking blue (once every 3 seconds) for AP
mode configuration.
Repeat the App-Config process.
Factory reset the Smart device and try to add it
again.
The Smart device and the mobile device are
required to be under same Wi-Fi network when
adding the Smart device for the first time. After
successful device configuration, you can remotely
control the device through 2G/3G/4G cellular
network.
4. Can I control device through 2G/3G/4G
cellular network?
the smart device
the smart device
WiFi smart
device
smart device
FCC Waring:
Any Changes or modifications not expressly approved by the party responsible for compliance
could a
void the user’s authority to operate the equipment.ope
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this
device
must accept any interference received, including interference that may cause
undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment .This equipment should be installed and operated with minimum distance 20cm between
the radiator& your body.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.—Connect the equipment into an
outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.