User's Manual

3 Diagram2 Packing List
Handle Mainframe
When unpacking your KickScooter, please verify that the above items are included in the package. If you are missing any
components, please contact your dealer/distributor or nearest service center (see contacts in the user manual). After
verifying that all components are present and in good condition, you can assemble your new KickScooter.
Please retain the box and packaging materials in case you need to ship your KickScooter in the future.
Remember to power off your KickScooter and unplug the charge cable before assembling, mounting accessories, or
cleaning the mainframe.
Accessories
Power CordM5 Flathead Screw x 6
(one extra)
Hex Wrench
User Materials
04 05
Battery
Compartment
Disc Brake
Brake Light
Buckle
Control Panel & Power Button
Accelerator
Mudguard
Quick Release Lever
Kickstand
Folding Mechanism
Front Fork
Stem
Wheel Motor
Charging Port
(On the other side)
Handlebar
Brake Lever
Control Panel & Power Button
Speedometer: Display the current speed of the scooter, as well as to display error codes.
Modes: Three riding modes available. "ECO" for Energy Saving mode (top speed 15 km/h, smooth throttle, suitable for
beginners), "D" for Standard mode (top speed 20 km/h) and "S" for Sport mode (top speed 25 km/h, powerful, only
recommended for skilled riders).
Bluetooth: The icon indicates that the scooter has been successfully connected to the mobile device.
Error: The wrench icon indicates that the scooter has detected an error.
Battery Level: The battery power is indicated by 5 bars, each representing approximately 20 % of a full battery.
Power Button: Press the button to turn the scooter on, and press and hold the button for 2 seconds to turn the scooter off. When
the scooter is on, press the button to turn the headlight on/off, and double press to switch between modes.
Scooter Bell
Battery Charger
(Sold Separately)
Headlight
QUICK STARTUSER MANUAL
LIMITED WARRANTY