User's Manual

08 09
7 Charging
8 Learning to Ride
Wear an approved helmet and other protective
gear to minimize any possible injury.
1. Power on the scooter and check the
indicator lamp power level. Charge
the scooter if the battery level is low.
6 First Ride
There are safety risks when learning to ride the KickScooter. You must read the
Safety Instructions via the App before your first ride.
For your safety, your new KickScooter is not activated and will beep occasionally
after Power ON.
Until activated, the KickScooter maintains a very low riding speed, and can not be
ridden with full function. Install the App on your mobile device (with Bluetooth 4.0
or above), connect to the KickScooter with Bluetooth, and follow the App
instructions to activate your KickScooter and enjoy the full performance.
Scan the QR code to download the App (iOS 8.0 or above, Android™ 4.3 or above).
Your KickScooter is fully charged when the LED on the charger changes from red (charging) to green
(trickle charge). Close the charge port cover when not charging.
2
1
Install the App and register/login. Power on the KickScooter. A blinking
Bluetooth icon indicates the KickScooter
is waiting for a connection.
3
4
Click “Vehicle”→“Search device” to connect to
your KickScooter.
The KickScooter will beep when the connection
is successful. The Bluetooth icon will stop
blinking and remain illuminated.
Follow the App instructions to active the KickScooter and learn how to ride safely.
You can now start to use your KickScooter, check the status with App, and interact with other users. Have fun!
WARNING
Do not connect the charger if the charge port or charge cable is wet.
ES4
Charge port
Close the charge
port cover when
finished.
Open the charge
port cover.
Insert the
charge plug.
ES1/ES2
Charge port
Charging step tips
Vehicle N Fans Club Me
Discover