User's Manual

06 07
4 Assembling Your KickScooter
3. Install four screws (two on each side)
with the included hex wrench.
4. Verify that your KickScooter powers on
and off.
2. Firmly connect the wires inside the
handle and the stem. Slide the handle
onto the stem. Be aware of the correct
orientation.
Head Light
toward front
1. Unfold the stem and push it until you
hear a click. Then unfold the
kickstand to support the scooter.
3. Install the battery pack onto the support
bracket and tighten the screws securely.
2. Install the support bracket and fasten
securely with three screws, as shown.
4. Verify that your KickScooter powers on
and off.
1. Remove the three screws on the
stem, as shown. Then remove the
cover near the charge port.
Follow these steps when installing a second battery pack:
5 Installing a Second Battery Pack