User's Manual

3 Connect to a Vehicle (Vehicle Mode)

NOTE: Please ensure that the vehicle to be connected is turned on and the ﬁrmware has been upgraded to the latest version in the Segway-Ninebot App.

1. Press the power switch to turn on the speaker. The indicator is white by default. If the indicator is blue, please press

the Mode button to switch to the white indicator.

Tip:

After powered on, the speaker has two modes: vehicle mode (white light with engine sound) and music mode (blue

light with chord sound eect).

2. Press and hold the Mode button to start pairing. Please operate the vehicle according to the voice prompt to

complete the pairing. Once the pairing succeeds, the speaker will automatically connect to the vehicle, and the

indicator will be solid white. If the pairing fails, repeat this step.

Note:

· When connecting, please ensure that there is only one active vehicle within the range of the Bluetooth (about 10 m)

and the Bluetooth of the vehicle is not connected, otherwise the connection may not be successful.

· If the vehicle to be connected is Ninebot eScooter or Ninebot eMoped, please disable the "Ninebot AirLock"

function in Segway-Ninebot App, otherwise the speaker may not be connected.

· The speaker automatically connects the paired vehicle. If you need to connect the speaker to another vehicle,

please repeat this step.

3. After the speaker is successfully connected, press "Next" to change the engine sound eect.

Tip:

The speaker has 4 kinds of engine sound eects: single-cylinder engine, double-cylinder engine, V8 engine and V12

engine.