Brochure

MC 5M, 6P & 7P
Detergent application
We bring you the solutions
The 2 x 2.5 l tanks are easily removable for
emptying and filling. It is also easy to see the
level of detergent remaining in each tank, thus
allowing the user to pre-fill enough detergent
before leaving for the work place.
The MC 5M, 6P & 7P line (with exceptions) are
equipped with a two-way detergent suction
valve, enabling the user to choose between two
different detergents depending on his application.
In this way, two different cleaning tasks can be
easily solved without the need to return to the
preparation site and change chemicals.
In addition, the MC 6P & 7P models are equipped with a
Low Pump Oil Safety which cuts out the pressure washer if
the level of pump oil is too low – thus protecting the life-
time. It is possible to upgrade the MC 5M vith a low pump
oil security system.
All pressure washers require a certain level of maintenance.
The service concept on the MC 5M, 6P & 7P line is aimed
at reducing the time needed to make this maintenance –
and thus, the cost.
The pump oil level can be easily seen from the outside of
the machine – indicating to the user whether the pump
contains enough oil before use.
The front cabinet part of the MC
line can be quickly and easily tipped
up and removed to give direct access
to the motor pump unit, reducing
service time and cost.
Accessibility
Optimal service and maintenance concept