User manual

6
4 Charging the Battery
4.1 Wall Mounting for
charging base
Your Handy is designed to hang
vertically on the wall with handle
end pointing downward. When
wall mounting, care should be
taken to ensure that there are
no dangerous objects hidden
beneath the wall surface (e.g.
electrical wires, pipe, etc.) Use
a 5 mm drill for drilling holes for
the plastic anchors. Then, insert
anchors and screw the charging
base onto the wall.
We recommend that you posi-
tion your Handy close to an
electrical outlet. Then plug the
charging plug into the socket at
the side of the charging base.
4.2 Place the Nilfi sk Handy
in the charging stand
If the Nilfi sk Handy is not placed
properly in the charging stand,
it will not be charged or it may
topple over.
Be careful not to trip over the
power cable when charging the
battery.
4.3 Connect the power plug
to the power outlet
When the power plug of the bat-
tery charger is connected to the
AC power outlet, the indication
light will light up.
Note: The indication light will
always be lit when the power is
connected. The main body may
become warm during charging.
This is not an abnormal sign.
Make sure to charge the battery in the following situations:
• When using the product for the fi rst time after purchase
• When the suction power reaches an insuffi cient level
• When the product has been stored for a prolonged period (more than a month)
81942400_UM_HANDY.indb 681942400_UM_HANDY.indb 6 19-01-2010 11:39:1719-01-2010 11:39:17