Manualshelf

Operation Manual

ManualsBrandsNilfisk ManualsPressure WasherD 140.4 X-TRA
12345678910
10
Original Instructions
EN
DA
NO
SV
FI
DE
FR
NL
I
T
ES
PT
E
L
R
C
S
H
U
P
L
HR
SL
SK
L
V
LT
ET
R
U
Z
H
3 Before you start using your high pressure washer
See the pictorial quick reference guide – unpacking.
Illustration shows the operation elements and how to prepare your machine for use.
Operation elements
1. Start/stop switch
2. Water inlet with fi lter
3. High pressure connection (models without hose reel)
4. High pressure hose (models without hose reel)
5. Electric cable
6. Click&Clean spray lance
7. Spray handle with lock (7a)
8. Click&Clean Tornado nozzle
9. Click&Clean Tornado PR nozzle
10. Click&Clean Powerspeed nozzle
11. Foam sprayer
12. Nozzle cleaning tool
13. Hose reel
14. Model tag
15. Trolley handle (telescopic handle)
16. Hose hook (models without hose reel)
17. Hexagon key for handle and bracket mounting and lid for battery
18. Button for telescopic handle
19. Turnable cable hook
20. Quick coupling
3.1 Mounting of trolley handle, hose hook and hose reel
Mounting of trolley handle and hose hook (standard models)
A1 Push down the trolley handle (15) over the two metal tubes. Make sure that the handle
is mounted as illustrated. Mount screws with nuts (make sure that the screws go through
handle as well as tube).
A2 Mount the hose hook (16) on the handle (2 screws).
Mounting of hose reel handle (models with hose reel)
A3 Click the hose reel handle on to the trolley handle (no screws).
3.2 Mounting of quick coupling
A4 When mounting the quick coupling for the fi rst time, check that the factory fi tted fi lter is
positioned in the water inlet pipe.
A5 Screw the quick coupling tight on to the water inlet (2).
IMPORTANT!
The inlet fi lter must always be fi tted in the water inlet pipe to fi lter out sand, lime stone and other
impurities as these will damage the pump valves. The fi lter is factory fi tted.
If the fi lter is removed this will invalidate the guarantee.
3.3 Telescopic handle
A6 The machine features a tele scopic handle. To raise or lower the handle, press the button
(18) and move the handle upwards or downwards. When a click is heard, the handle is in
right position.
A