Operation Manual

INSTRUCTIONS FOR USE ENGLISH

9099872000 - SCRUBTEC 337.2 19

FUSE CHECK/REPLACEMENT/RESET

1. Drive the machine on a level oor.

2. Check that the function selection knob (31) is turned to “0”

and disconnect the battery connector (7).

3. Open the cover (4) and check one of the following fuses

for deactivation or integrity (Fig. 8):

• (A): F1 (35 A) circuit breaker, brush motor.

• (B): F2 (30 A) blade fuse, vacuum system motor.

• (C): F3 (5 A) blade fuse, accessories.

Reset or replace any fuse, after having checked and

repaired any problem that caused deactivation.

4. Close the cover (4).

Figure 8

P100414