Operation Manual
27
1)
Optional accessories / Option depending on model
Original Instructions
ATTIX 995-0H/M SD XC Type 22
9 Further information
9.1 Recycling the vacuum
cleaner
Make the old cleaner unusable immediately:
1. Unplug the cleaner
2. Cut the power cord.
3. Do not discard of electrical appliances with household waste.
As specified in European Directive 2002/96/EC on old elec-
trical and electronic appliances, used electrical goods must
be collected separately and recycled ecologically.
Contact your local authorities or your nearest dealer for fur-
ther information.
9.2 Guarantee
Our general conditions of business are applicable with regard to the
guarantee.
Unauthorised modifications to the appliance, the use of incorrect
brushes in addition to using the appliance in a way other than for the
intended purpose exempt the manufacturer from any liability for the
resulting damage.
9.3 Tests and approvals
Electrical tests must be per formed in accordance with the provisions
of safety regulations (VBG4) and to DIN VDE 0701 Part 1 and Part
3. In ac cord ance with DIN VDE 0702 these tests must be performed
at regular intervals and after repairs or modifications.
The vacuum cleaner has been approved in accordance with IEC/EN
60335-2-69.
Equally, the cleaners fulfil the requirements of the ATEX regulation
94/9/EG for use in zone 22.
9.4 EC declaration of
conformity
EC conformity declaration
NILFISK-ADVANCE A/S
Sognevej 25
DK-2605 Brøndby
Product:
Vacuum cleaner for wet and dry operation
Model:
ATTIX 995-0H/M SD XC Type 22
Description:
230-240 V~, 50/60 Hz, 2x1100W
Dust Class M and H
ATEX Zone 22
II 3D Ex tD A22 T135 °C IP54
The design of this appliance
complies with the following
provisions:
EC - Machinery Directive 2006/42/EC
EC - Directive EMC 2004/108/EC
EC - Explosive Atmosphere directive 94/9/EC „ATEX“
Applied harmonized standards:
EN ISO 12100-1 (2004), EN ISO 12100-2 (2004), EN
55014-1 (2006), EN 55014-2 (2001), EN 61000-3-2
(2006), EN 1127-1 (2007), EN 61241-10 (2004)
Applied national standards and
technical specifi cations:
EN 60335-2-69 (2009)
IEC 60335-2-69 (2008)
Anton Sørensen
General Manager EAPC
Technical Operations Brøndby, 01.06.2008