Operation Manual

16
1)
Optional accessories / Option depending on model
Original Instructions
ATTIX 995-0H/M SD XC Type 22
4 Operation
4.1 Connections
4.1.1 Electrical connection
The operating voltage shown on the
rating plate must corres pond to the
voltage of the mains power supply.
1. Ensure that the cleaner is
switched off.
2. Insert the power cord into a
properly installed and fused
socket with earthing contact.
4.2 Switching on the
vacuum cleaner
4.2.1 Switch „ I-0-II “
The hose diameter and the setting
for the suction hose diameter must
correspond.
ø27 ø27
ø32 ø32
ø36 ø36
ø38 ø38
ø50 ø50
Switch
position
Function
I
Reduced
suction
0
Off
II
Maximum
suction
4.3 Check volume flow
monitor
Before picking up dust with maxi-
mum room concentration values:
1. Check that all the filters, in-
cluding the filter for supply
air to the motor, are present,
properly fitted and not dam-
aged.
2. When the motor is running,
hold the suction hose shut.
An acoustic warning sounds
after approx. 1 second.
4.4 Acoustic warning
For safety reasons, an acoustic
warning sounds if the air speed
in the suction hose drops to be-
low 20 m/s. See section “Trou-
bleshooting”.