Operation Manual

12
1)
Optional accessories / Option depending on model
Original Instructions
ATTIX 995-0H/M SD XC Type 22
3.1.3 Inserting the safety
filter bag
1. The mains plug should not
yet be inserted into a socket.
2. Apply parking brakes
(A) on both castors.
A
A
3.1.2 Before starting the
cleaner
Depending on how hazardous the dust is, the cleaner must be fitted
with appropriate filters:
Type of dust Filter bag/waste bag
• Non-hazardous dust
• Non-carcinogenic
dust with OEL values
>0.1 mg/m³ (observe
any additional national
regulations)
• Wood dust
• Explosive dust, dust ex-
plosion class St1, St2,
St3 in Zone 22
Waste bag (5 pcs.)
Order No. 302001480
• All dusts with OEL val-
ues
• Explosive dust, dust ex-
plosion class St1, St2,
St3 in Zone 22
Safety filter bag (5 pcs.)
Order No. 302003473
• All dusts with OEL values
• Explosive dust, dust ex-
plosion class St1, St2,
St3 in Zone 22
Filter element “H”
Order No. 107400564
• All dusts with OEL values
• Explosive dust, dust ex-
plosion class St1, St2,
St3 in Zone 22
Motor cooling filter “TYPE
22”
Order No. 107400041
Before picking up dust with occupational exposure limit values:
1. Check that all the filters are present and properly fitted.
2. Do not use the cleaner with damaged or missing antistatic clamp.
Risk of explosion due to static discharge in explosive atmospheres.
3. The hose diameter and the setting for the suction hose diameter
must be the same.
4. When the motor is running, hold the suction hose shut. For safety
reasons, an acoustic warning sounds if the air speed in the suction
hose drops to below 20 m/s.