Operating instructions ATTIX 30 / PC / XC ATTIX 40 / PC / XC ATTIX 50 / PC / XC ATTIX 50-21 PC EC 107400397 E
ATTIX 30-40-50 ATTIX 30 1 9 8 7 2 3 6 5 4 ATTIX 50 ATTIX 40
ATTIX 30-40-50 Contents 1 Important safety instructions ............................................................................................2 2 Description 2.1 2.2 Operating elements ..............................................................6 Operating panel ....................................................................7 3 Before starting the cleaner 3.1 3.1.1 3.1.2 3.2 Assembling the vacuum cleaner...........................................
ATTIX 30-40-50 1 Important safety instructions Symbols used to mark instructions Prior to using the appliance for the first time, be sure to read this document through and keep it ready to hand. DANGER Danger that leads directly to serious or irreversible injuries, or even death. WARNING Danger that can lead to serious injuries or even death. CAUTION Danger that can lead to minor injuries and damage.
ATTIX 30-40-50 Transport 1. Before transporting the dirt tank, close all the locks. 2. Do not tilt the cleaner if there is liquid in the dirt tank. 3. Do not use a crane hook to lift the cleaner. Storage 1. Store the appliance in a dry place, protected from frost. Electrical connection 1. It is recommended that the vacuum cleaner should be connected via a residual current circuit breaker. 2.
ATTIX 30-40-50 Risks Electrical components DANGER Electric shock due to faulty mains connecting lead. Touching a faulty mains connecting lead can result in serious or even fatal injuries. 1. Do not damage the mains power lead (e.g. by driving over it, pulling or crushing it). 2. Regularly check whether the power cord is damaged or shows signs of ageing. 3.
ATTIX 30-40-50 Picking up liquids CAUTION Picking up liquids. Do not pick up flammable liquids. 1. Before liquids are picked up, always remove the filter bag/ waste bag and check that the float 1) or the water level limit 1) works properly. 2. The use of a separate filter element or filter screen is recommended. 3. If foam appears, stop work immediately and empty the tank. Hazardous materials WARNING Hazardous materials. Vacuuming up hazardous materials can lead to serious or even fatal injuries 1.
ATTIX 30-40-50 2 Description 2.
ATTIX 30-40-50 2.
ATTIX 30-40-50 3 Before starting the cleaner 3.1 Assembling the vacuum cleaner 3.1.1 Taking accessories out of the packaging 1) A A 3.1.2 Attaching the suction pipe holder to the suction pipe 1) 1. Take vacuum cleaner and accessories out of the packaging. 2. The mains plug should not yet be inserted into a socket. 4. Open the retaining clamps (A) and remove the upper section of the vacuum cleaner. 5. Take the accessories 1) out of the dirt tank and the packaging. 1.
ATTIX 30-40-50 3.2 Inserting the filter bag A A 1. The mains plug should not yet be inserted into a socket. 2. Open the retaining clamps (A) and remove the upper sec-tion of the vacuum cleaner. 3. Insert the filter bag into the dirt tank.
ATTIX 30-40-50 4. Press the filter bag connection firmly on to the inlet fitting. A A 10 1) 5. Attach the upper section of the vacuum cleaner. 6. Close the retaining clamps (A ). Ensure that the retaining clamps fit properly.
ATTIX 30-40-50 4 Control / Operation 4.1 Connections 4.1.1 Connecting the suction hose 1. Connect the suction hose. 4.1.2 Electrical connection 1. Ensure that the cleaner is switched off. 2. Insert the power cord into a properly installed and fused socket with earthing contact. The operating voltage shown on the rating plate must correspond to the voltage of the mains power supply. 4.2 Switching on the vacuum cleaner 4.2.1 Switch „ 0-I “ 1) 4.2.
ATTIX 30-40-50 4.2.3 Suction power control 1) Switch position Function The suction power control switch allows precise adaptation of the suction power for different cleaning tasks. auto 4.2.4 Auto-On/Off-Operation - "auto" switch position 1) 1. Switch off the vacuum cleaner. 2. Switch off the power tool. 3. Connect the power tool and the vacuum cleaner with a suction hose. 4. Insert the plug of the power tool into the tool socket on the operating panel of the vacuum cleaner. 5.
ATTIX 30-40-50 4.3 Cleaning the filter element 4.3.1 Cleaning the filter element " Push&Clean System " (ATTIX 30- / 40- / 50-xx PC) Filter Cleaning System Only for vacuum cleaning without a filter bag and without a cloth insert filter. If suction performance drops: 1. Turn switch to position "I" (maximum suction power). 2. Close the nozzles or suction hose opening with the palm of your hand. 3. Press the button to start filter cleaning three times.
ATTIX 30-40-50 5 Applications and techniques 5.1 Techniques If used correctly, additional accessories, suction nozzles and suction hoses can enhance the cleaning action and reduce the cleaning effort. Effective cleaning is achieved if you follow just a few guidelines in combination with your own practical experience in special fields. Here are some basic tips. 5.1.
ATTIX 30-40-50 6 After finishing work 6.1 Switching the vacuum cleaner off and storage A C B 1) Optional accessories / Option depending on model Original Instruction 1. Switch off the cleaner and pull the mains plug out of the socket. 2. Wind up the power cord onto the handle (A). Begin winding up the cord at the cleaner end and not the plug end to prevent the power cord from tangling up. 3. Empty the dirt tank and clean the vacuum cleaner. 4.
ATTIX 30-40-50 7 Maintenance 7.1 Maintenance plan After finishing work When required 7.2.1 Emptying dirt tank 7.2.2 Replacing the filter bag 7.2.3 Replacing the disposal bag 7.2.4 Replacing filter element (Push&Clean) 7.2.5 Replacing filter element (XtremeClean) 7.2 Maintenance work 7.2.1 Emptying the dirt tank After emptying the tank: clean the rim of the tank and the seals in the intermediate ring and the upper section of cleaner before refitting them.
ATTIX 30-40-50 7.2.2 Replacing the filter bag A A B 1. Switch off the vacuum cleaner and pull the mains plug out of the socket. 2. Open the retaining clamps (A) and remove the upper section of the vacuum cleaner. Removing the filter bag: 3. Carefully remove the filter bag connection from the inlet fitting (C). 4. Close the filter bag connection (D) with the slider. 5. Dispose of the filter bag in accordance with legal regulations. D C Inserting the filter bag: 6. Clean the dirt tank. 7.
ATTIX 30-40-50 7.2.3 Replacing the disposal bag A A 1. Switch off the vacuum cleaner and pull the mains plug out of the socket. 2. Open the retaining clamps (A) and remove the upper section of the vacuum cleaner. Removing the disposal bag: 3. Close the disposal bag with string (B). 4. Carefully remove the filter bag connection from the inlet fitting (C). 5. Close the disposal bag connection (D) with the slider. 6. Dispose of the disposal bag in accordance with legal regulations.
ATTIX 30-40-50 7.2.4 Replacing filter element (Push & Clean System) Never use the vacuum cleaner without a filter. A A 1. Switch off the vacuum cleaner and pull the mains plug out of the socket. 2. Open the retaining clamps (A) and remove the upper section of the vacuum cleaner. Removing the filter element: 3. Turn the filter holder anticlockwise and remove it . 4. Carefully remove the filter element. 5. Clean the filter seal (B). Check it for damage and replace it if necessary.
ATTIX 30-40-50 7.2.5 Replacing filter element (XtremeClean System) Never use the vacuum cleaner without a filter. A A 1. Switch off the vacuum cleaner and pull the mains plug out of the socket. 2. Open the retaining clamps (A) and remove the upper section of the vacuum cleaner. Removing the filter elements: 3. Open filter tension part (B). 4. Remove carefully the cassettes with filter elements. B B Inserting the filter elements: 5. Insert new filter elements (C) into the cassettes (D). 6.
ATTIX 30-40-50 8 Troubleshooting Fault ‡ Motor does not start ‡ Motor does not run in automatic mode 1) ‡ Reduced suction power ‡ No suction power during Cause > Fuse of the mains socket has blown. • Connect mains fuse. > Overload protection switch has tripped. • Switch off the vacuum cleaner and allow it to cool for approx. 5 minutes. If the cleaner cannot be started again, contact the Nilfisk-Alto service department. > Motor is faulty. • Have motor changed by Nilfisk-Alto Service.
ATTIX 30-40-50 9 Further information 9.1 Recycling the cleaner Make the old cleaner unusable immediately. 1. Unplug the cleaner. 2. Cut the power cord. 3. Do not discard of electrical appliances with household waste. As specified in European Directive 2002/96/EC on old electrical and electronic appliances, used electrical goods must be collected separately and recycled ecologically. Contact your local authorities or your nearest dealer for further information. 9.
ATTIX 30-40-50 9.
HEAD QUARTER DENMARK Nilfisk-Advance A/S Sognevej 25 DK-2605 Brøndby Tel.: (+45) 4323 8100 www.nilfisk-advance.com SALES COMPANIES ARGENTINA Nilfisk-Advance srl. Herrera 1855, 6 floor, Of. A-604 ZC 1293 – Ciudad Autónoma de Buenos Aires – Argentina www.nilfisk-alto.com AUSTRALIA Nilfisk-ALTO Unit 1, 13 Bessemer Street Blacktown NSW 2148 Australia www.nilfisk-alto.com.au AUSTRIA Nilfisk-ALTO Geschäftsbereich der Nilfisk-Advance GmbH Metzgerstraße 68 A-5101 Bergheim/Salzburg www.nilfisk-alto.
