Network Guide
Table Of Contents
- About This Guide
- Camera and Network System Chart
- What Networks Can Do for You
- Notices
- Table of Contents
- Connecting to Computers via Wi-Fi
- Connecting to Smart Devices
- Connecting to Networks Using the WT-7
- Menu Guide
- Troubleshooting
- Appendix
- Index
34 Connecting to Smart Devices
6 Camera/iOS device: Initiate pairing.
Camera: Press J.
iOS device: Tap the button indicated in
the illustration (the label may differ
depending on the version of iOS you
are using).
D Pairing Error
If you wait too long between pressing the button on the camera
and tapping the button on the iOS device, pairing will fail and an
error will be displayed.
• Camera: Press J and return to Step 1.
• iOS device: Dismiss the SnapBridge app and check that it is not
running in the background, then open the iOS “Settings” app and
request iOS to “forget” the camera as shown in the illustration
before returning to Step 1.