Supplementary Firmware Update Manual

2
New options for Custom Settings f2 “Custom
controls (shooting)” and g2 “Custom controls”:
“Save focus position” and “Recall focus
position”
[Save focus position] and [Recall focus position] have been
added to the roles that can be assigned to camera controls for
Custom Settings f2 [Custom controls (shooting)] and g2
[Custom controls]. Assign [Save focus position] to [Lens Fn
button] and [Recall focus position] to [Lens Fn2 button]
respectively to save and quickly restore the lens’s current focus
position using these controls (“memory recall”). You may find
this useful if you frequently return to subjects at a fixed focus
distance.
•
Memory recall is available only when an autofocus Z mount
lens equipped with Fn and Fn2 buttons is mounted on the
camera. If the lens is not equipped with an Fn2 button, the
camera cannot save the focus position even if the [Save focus
position] is assigned to the lens Fn button.
•
Focus positions can be saved and recalled in both photo and
video modes.
•
Focus positions can be saved in any focus mode.
•
The stored focus position is reset when the lens is detached.
Features available with “C”
firmware version 1.30