Setting Guide (Auto Capture Edition)

Use [Capture criteria] to choose the trigger criteria for auto
capture. There are three types of trigger criteria: [Motion], [Subject
detection], and [Distance]. Highlight criteria and press J to select
(M) or deselect (U). You can combine any two trigger criteria, or use
all three if you so desire. Auto capture will be triggered only if all
the selected criteria are satisfied.
“Capture Criteria”
Option Description
[Motion]
Select (M) this option to include the direction the subject is moving as one
of the criteria that must be satisfied to trigger the start of auto capture
shooting (0 26).
[Subject detection]
Select (M) this option to include detection of a subject as one of the criteria
that must be satisfied to trigger the start of auto capture shooting (0 32).
[Distance]
If this option is selected (M), shooting will continue while the subject is
within the specified range of distances (0 30).
Press X to save changes and return to the auto capture settings display.
To exit to the auto capture settings display without saving changes, press i.
D Caution: Capture Criteria
Each additional criterion makes the trigger conditions more restrictive and may prevent shooting
proceeding as intended. When using auto capture for the first time in a given location, we suggest that
you enable (M) criteria one-by-one, taking a test shot each time and changing criteria if they do not
function as expected.
25
“Capture Criteria”