Reference Guide (PDF Edition)

Holding the camera so that light can enter, examine the
image sensor for dust or lint.
If no foreign objects are pr
esent, proceed to Step4.
Remove any dust and lint from the sensor with a blower.
Do not use a blower-brush. The bristles could damage the
sensor
.
Dirt that cannot be removed with a blower can only be
removed by Nikon-authorized service personnel. Under no
circumstances should you touch or wipe the sensor.
Manual Cleaning
If foreign matter cannot be r
emoved from the image sensor using image sensor cleaning, the sensor
can be cleaned manually as described below. Note, however, that the sensor is extremely delicate
and easily damaged; we recommend that manual cleaning be performed only by a Nikon-authorized
service representative.
Select [Sensor shield stays open] for [Sensor shield behavior at power off] in the setup menu.
Turn the camera off and remove the lens.
Replace the lens or supplied body cap.
896
Caring for the Camera
1
2
3
4