Reference Guide (PDF Edition)

Table Of Contents
Remove the BL-7 battery chamber cover.
Lift the batt
ery chamber cover latch, turn it to the open (A)
position (q), and remove the BL-7 battery chamber cover (w).
Pass the DC cable over the power connector cable guide (q)
and slide it down until it is at the bottom of the slot.
Insert the DC plug into the DC IN connector (w).
Insert the power connector.
Fully insert the power connect
or into the battery chamber as
shown.
Attaching a Power Connector and AC Adapter
Turn the camera o
ff before attaching an optional power connector and AC adapter.
Connect the EH-6d AC adapter to the EP-6a power connector.
889
Compatible Accessories
1
2
3