Reference Guide (PDF Edition)

Table Of Contents
Role Description
C
[ISO sensitivity
(decrease)]
Rotat
e the lens Fn ring counterclockwise to decrease
ISO sensitivity. This option is enabled automatically when
[ISO sensitivity (increase)] is selected for [Lens Fn ring
(clockwise)].
9
[Pattern tone range]
Press the control to cycle through zebra pattern tone range
options.
1
[Record videos]
Press the control to start recording. Press again to end
recording.
e
[Same as AF-ON
button]
The control plays the role currently selected for the AF-ON
button.
n
[Shooting menu
bank]
Press the control and rotate a command dial to choose a
shooting menu bank.
v
[Shooting mode]
Press the control and rotate the main command dial to
choose a shooting mode.
J
[Choose image area]
Press the control and rotate a command dial to choose the
image area for videos. Note that the image area cannot be
changed while recording is in progress.
E
[Exposure
compensation]
Adjust exposure compensation either by holding the control
and rotating a command dial or by rotating the lens control
ring.
9
[ISO sensitivity]
Adjust ISO sensitivity either by holding the control and
rotating a command dial or by rotating the lens control ring.
m
[White balance]
Hold the control and rotate the main command dial to adjust
white balance for videos. Some options offer sub-options that
can be selected by rotating the sub-command dial.
h
[Set Picture Control]
Press the control and rotate a command dial to choose a
Picture Control.
y
[Active D-Lighting]
Press the control and rotate a command dial to adjust Active
D-Lighting for videos.
680
g2: Custom Controls