Reference Guide (PDF Edition)

Table Of Contents
The [Connect to FTP Server] Upload Status Display
The [Connect to FTP ser
ver] display shows the following:
4 3 2
1
Status:
The status of the connection to the host. The pr
ofile name is displayed in green when a
connection is established.
While files are being transferred, the status display shows “Now uploading” preceded by the
name of the file being sent. Errors and error codes are also displayed here (
0 383).
Signal strength: Ether
net connections are shown by d. When the camera is connected to a
wireless network, the icon instead shows the wireless signal strength.
Band: The band used by the wireless network to which the camera is connected in
infrastructure mode.
Pictures/time remaining: The number of pictures remaining and the time needed to send
them. The time remaining is an estimate only.
D Loss of Signal
Wireless transmission may be interrupted if the signal is lost. Upload of pictures with upload marking
can be resumed by turning the camera off and then on again once the signal has been re-established.
D Caution: During Upload
Do not remove the memory card or disconnect the Ethernet cable during upload.
D Caution: Uploading Protected Pictures via FTP
The copies on the FTP server will not be protected even if the originals are. Markings can be added
using ratings (
0 250).
378
FTP Servers: Connecting via Ethernet or Wireless
L
AN
1
2
3
4