Reference Guide (PDF Edition)

Take pictures.
Take the number o
f pictures in the bracketing program.
While bracketing is in effect, the shooting display shows an
ADL bracketing icon and the number of shots remaining in
the bracketing sequence. After each shot, the number of
shots remaining will be reduced by one.
No. shots: 3 Display after first shot
The control panel shows a M icon and a bracketing progr
ess indicator. A segment
disappears from the indicator after each shot.
D ADL Bracketing
[Number of shots] and [Amount] can also be selected via the [Auto bracketing] item in the photo
shooting menu.
In continuous release modes, shooting will pause after the number of shots specified in the
bracketing program have been taken. Shooting will resume the next time the shutter-release button
is pressed.
If the camera is turned off before all shots in the sequence have been taken, bracketing will resume
from the first shot in the sequence when the camera is turned on.
Cancelling Bracketing
To cancel bracketing, press the BKT button and rotate the main command dial until the number of
shots in the bracketing sequence is zero (0F). The program last in effect will be restored the next time
bracketing is activated. Bracketing can also be cancelled by performing a two-button reset (
0 197),
although in this case the bracketing program will not be r
estored the next time bracketing is activated.
182
Bracketing
3