Reference Guide (PDF Edition)

While the shutter-release button is pressed halfway, the frame-
count display will show the number of pictures that can be
st
ored in the memory buffer.
When the buffer is full, the display will show r000 and the frame
rate will drop.
The number shown is approximate. The actual number of photos
that can be stored in the memory buffer varies with camera
settings and shooting conditions.
With the release mode dial rotated to c, you can
choose a release mode by holding the c
button
and rotating the main command dial.
Settings for the selected mode can be adjusted by holding the
c button and rotating the sub-command dial.
High-speed frame captur
e+ modes with frame rates of 30, 60, or
120fps are available only when the release mode dial is rotated
to c (
0 142).
Tip: The Memory Buffer
Tip: Viewing Bursts
Each burst (series) o
f photos taken in continuous shooting mode or during high-speed frame
capture+ is treated as a group. To choose how bursts are handled during playback, use the [Series
playback] item in the playback menu.
Quick Release-Mode Selection
141
Release Mode